Multimeter Leads

Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.


We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

We also offer a variety of Multimeters & Accessories for all your testing needs.

Checking your Multimeter Leads:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

...
Read more Read less

Filters

Viewing 21 - 40 of 130 products
Results per page
Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
RS Stock No. 726-3643
Mfr. Part No.TLK281-1
BrandFluke
MYR949.93
Each
units
Automotive Test Lead Kit - Crocodile Clip, Piercing Clip - - - - - - - -
RS Stock No. 412-119
Mfr. Part No.FLUKE TLK287
BrandFluke
MYR1,026.00
Each
units
Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug No 1.5m 2 A, 5A, 10 A 300V, 1000 V CAT II 300 V, CAT III 1000V - - CAT II, CAT III
RS Stock No. 405-499
Mfr. Part No.20033
BrandStaubli
MYR472.62
Each
units
Test Lead Kit - 2 mm Crocodile Clip - - - - - - - -
RS Stock No. 731-5273
BrandRS PRO
MYR319.59
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug Yes 1.2m - 600V CAT III 600V -20°C +70°C CAT III
RS Stock No. 449-9892
Mfr. Part No.TL222
BrandFluke
MYR211.00
Each
units
Silicone Test Lead Set - Banana Plug - 1.5m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 124-7405
BrandRS PRO
MYR61.46
1 Pair
Pair(s)
Test Lead Kit Automotive Back Probe with Cable Piercer Adapter - - - 10A - - -20°C +70°C -
RS Stock No. 731-5277
BrandRS PRO
MYR217.20
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug - 1.2m - 600V CAT III 600V -20°C +70°C CAT III
RS Stock No. 456-0427
Mfr. Part No.TL910
BrandFluke
MYR470.00
Each
units
Electronic Test Lead Kit - Spring Loaded Pin - 1m 3A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 816-029
BrandRS PRO
MYR105.41
Each
units
Test Lead - Crocodile Clip Yes - - 600/1000V CAT II 1000 V, CAT III 600V - - CAT II, CAT III
RS Stock No. 236-6677
Mfr. Part No.GE 7130
BrandSefram
MYR283.73
Each
units
High Frequency Probe - - - - - - - - - -
RS Stock No. 760-0382
Mfr. Part No.U1169A
MYR273.86
Each
units
Test Probe Lead - - - - 15A 600V, 1000 V CAT III, CAT IV - - -
RS Stock No. 850-7697
Mfr. Part No.TL27
BrandFluke
MYR246.00
Each
units
Test Lead Kit - Shrouded - 1.5m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 775-681
Mfr. Part No.932959001
MYR166.90
Each
units
Micro Test Equipment Set - Miniature Crocodile Clip, Spring Loaded Plug, Spring Loaded Socket - 1m - - - -15°C +70°C -
RS Stock No. 450-2358
Mfr. Part No.TL224
BrandFluke
MYR203.00
Each
units
Silicone Test Lead Set - Banana Plug - 1.5m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 605-7361
Mfr. Part No.TLA-115
MYR71.22
Each
units
Test Lead - Crocodile Clip, Hook Clip - 500mm - 100V CAT III 100V - - CAT III
RS Stock No. 518-1019
Mfr. Part No.99.00191
BrandStaubli
MYR249.63
1 Set
Set(s)
Test Lead - Right Angle Plug, Straight Plug - 1m 19A 1000V CAT II 1000V - - CAT II
RS Stock No. 204-583
BrandRS PRO
MYR234.92
Each
units
Fused Probe Kit - Right Angle Plug Yes 1.2m - 600, 1000V CAT III 1000 V, CAT III 600V -10°C +150°C CAT III
RS Stock No. 726-3637
Mfr. Part No.TL223-1
BrandFluke
MYR517.00
Each
units
Electrical Test Lead Kit - Crocodile Clip, Flat Blade, Straight to Right Angle - 1.5m - 600V, 1000 V CAT III 1000 V, CAT IV 600V -20°C +55°C CAT III, CAT IV
RS Stock No. 450-9400
Mfr. Part No.935982256
MYR291.32
1 Kit
Kit(s)
Test Lead Kit - Crocodile Clip - - - - - -25°C +80°C, +100 °C -
RS Stock No. 204-599
BrandRS PRO
MYR255.70
Each
units
Fused Probe Kit - Straight Plug Yes 1.2m - 600, 1000V CAT III 1000 V, CAT III 600V -10°C +150°C CAT III