Multimeter Leads

Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.


We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

We also offer a variety of Multimeters & Accessories for all your testing needs.

Checking your Multimeter Leads:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

...
Read more Read less

Filters

Viewing 1 - 20 of 130 products
Results per page
Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
RS Stock No. 726-3624
Mfr. Part No.TL75-1
BrandFluke
MYR183.93
Each
units
Test Lead Kit - Banana Plug - 1.22m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 726-3615
Mfr. Part No.TL71-1
BrandFluke
MYR186.93
Each
units
Test Lead Kit - Right Angle - 1.5m 10A 1000V CATII 1000V - - CAT III, CAT IV
RS Stock No. 243-2998
BrandRS PRO
MYR88.94
Each
units
Test Lead Kit - Crocodile Clip, Right Angle Plug - 1.2m 10A 1000V CAT III 1000V - - CAT III
RS Stock No. 692-7147
Mfr. Part No.11059A
MYR1,017.22
Each
units
Kelvin Probe Set - Banana Plug - 800mm - - - - - -
RS Stock No. 764-8696
Mfr. Part No.34133A
MYR236.95
Each
units
Right Angle Plug - Pogo Pin - 1.2m 3A 1000V CAT II 1000V - - -
RS Stock No. 705-1276
Mfr. Part No.TL175E
BrandFluke
MYR218.00
Each
units
Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000V - - CAT II, CAT III
RS Stock No. 436-866
Mfr. Part No.TLK289
BrandFluke
MYR1,026.00
Each
units
Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm No - - - - - - -
RS Stock No. 741-4358
Mfr. Part No.TL175
BrandFluke
MYR218.00
Each
units
Test Lead Kit - Shrouded - - 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V -20°C +55°C CAT III, CAT IV
RS Stock No. 468-7415
Mfr. Part No.TL76
BrandFluke
MYR246.00
Each
units
Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 292-1296
Mfr. Part No.GTY3620034P0002
MYR246.11
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 340-2421
BrandRS PRO
MYR183.94
Each
units
Insulated Test Lead Kit - Crocodile Clip, Retractable Plug, Shrouded Plug, Spade Terminal, Sprung Hook - 1.2m 20A 1000V CAT II 1000V -20°C +70°C CAT II
RS Stock No. 726-3633
Mfr. Part No.TL220-1
BrandFluke
MYR522.83
Each
units
Industrial Test Lead Kit - Crocodile Clip, Right Angle to Right Angle - 1.6m 10A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 501-304
Mfr. Part No.U1161A
MYR308.66
Each
units
Test Lead Extension Kit - Crocodile Clip, 4 mm Banana Plug - - 15A 600V, 1000 V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 760-0373
Mfr. Part No.U1168A
MYR506.07
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 738-339
Mfr. Part No.932793001
MYR156.75
Each
units
Test Equipment Set - Crocodile Clip, Spring Loaded Plug - 1m - - - -15°C +70°C -
RS Stock No. 726-3649
Mfr. Part No.TLK-225-1
BrandFluke
MYR1,323.98
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 161-6511
BrandRS PRO
MYR72.94
Each
units
Test Lead - Crocodile Clip - 500mm - - - - - -
RS Stock No. 324-5975
Mfr. Part No.1639274
BrandFluke
MYR969.00
Each
units
Electronic Test Lead Kit - Crocodile Clip, Hook Clip - 1m 3 A, 5A, 10 A 300V CAT II 300V - - CAT II
RS Stock No. 196-2555
Mfr. Part No.935982257
MYR221.01
Each
units
Test Lead Kit - - - - - - - - - -
RS Stock No. 468-7358
Mfr. Part No.2128533
BrandFluke
MYR695.00
Each
units
SureGrip Kit with Probe Light & Extender - - - - - - - - - -