Multimeter Leads

Multimeter leads are wires used with analogue and digital multimeters for testing and identifying problems. Multimeter leads are used for the testing of electrical components and circuits. They can be used to measure voltage, current and resistance. Test leads feature a connector, such as a jack, to connect to the multimeter and another connector for testing, such as a probe, crocodile clip or banana plug. Multimeter test leads are considered an essential part of electrical measurement.

Test leads must be in good condition. If the test leads are faulty, this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised. Therefore it is important to keep your test leads in good condition and replace them when necessary. A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be high quality, with the proper markings and product ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.


We have a range of available connector types to suit your needs, including crocodile clips, banana plugs, angled plugs and retractable plugs, as well as application-specific kits, such as automotive, electrical and industrial kits.

We also offer a variety of Multimeters & Accessories for all your testing needs.

Checking your Multimeter Leads:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

...
Read more Read less

Filters

Viewing 61 - 80 of 130 products
Results per page
Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Safety Category Level
RS Stock No. 827-0193
Mfr. Part No.KML 7488 / PZ / 0.75 / 100
MYR159.98
Each
units
Test Lead Kit - Tweezer Opening Plug - 1m 1A - - -10°C +50°C -
RS Stock No. 705-1954
Mfr. Part No.Fluke i2500-18
BrandFluke
MYR1,026.00
Each
units
Flexible Current Probe - - - 1.8m 2.5kA 600 V, 1000V CAT III 1000 V, CAT IV 600V - - CAT III, CAT IV
RS Stock No. 731-9395
Mfr. Part No.972337002
MYR124.93
Each
units
Test Probe Kit - Spring Loaded Pin - 1m 16A 1000V CAT II 1000 V, CAT III 1000V -15°C +70°C CAT II, CAT III
RS Stock No. 827-0187
Mfr. Part No.KML 7528 / 2ZA / 4x0.22 / 70
MYR1,506.36
Each
units
Test Lead Kit - Stackable Plug with 2 Pincer - 700mm 1A - - - - -
RS Stock No. 125-3731
BrandRS PRO
MYR216.78
Each
units
Test Lead Kit - Right Angle Plug Yes 1.25m - 1000V CAT III 1000V - - CAT III
RS Stock No. 203-5551
BrandRS PRO
MYR57.37
Each
units
Test Lead - 4 mm Banana Plug No 1.5m 10A 1000V CAT III 1000V - - CAT III
RS Stock No. 179-7905
Mfr. Part No.SKURZ 6100/19-4 IG 2MB Ni/SW
MYR24.45
Each
units
- - - - - - - - - - -
RS Stock No. 179-9416
Mfr. Part No.BU-PB72-2
MYR36.22
Each
units
Test Lead - 4 mm Banana Plug - 1828.8mm 15A 1000V - - - -
RS Stock No. 179-9406
Mfr. Part No.BU-PB24-0
MYR35.49
Each
units
Test Lead - 4 mm Banana Plug - 610mm 15A 1000V - - - -
New
RS Stock No. 212-2587
Mfr. Part No.P01295456Z
MYR110.58
Each
units
Insulated Test Lead Set - Plug No 1.5m - - CAT IV - - -
New
RS Stock No. 212-2582
Mfr. Part No.P01295450Z
MYR105.31
Each
units
Insulated Test Lead Set - Plug No 1.5m - - CAT IV - - -
New
RS Stock No. 212-2596
Mfr. Part No.P01295475Z
MYR131.64
Each
units
Insulated Test Lead Set - Plug No 1.5m - - - - - -
RS Stock No. 124-7400
BrandRS PRO
MYR596.75
1 Kit
Kit(s)
Automotive Test Lead Kit - Crocodile Clip - 1.2m, 25mm, 44mm, 155mm 10A - - -20°C +70°C -
RS Stock No. 179-9409
Mfr. Part No.BU-PB36-2
MYR35.49
Each
units
Test Lead - 4 mm Banana Plug - 0.9m 15A 1000V - - - -
RS Stock No. 179-9413
Mfr. Part No.BU-PB60-2
MYR37.52
Each
units
Test Lead - 4 mm Banana Plug - 1.5m 15A 1000V - - - -
RS Stock No. 187-4894
Mfr. Part No.TA80
BrandFLIR
MYR126.24
Each
units
- - - - - - - - - - -
RS Stock No. 125-3730
BrandRS PRO
MYR272.74
Each
units
Test Lead - Crocodile Clip Yes - - - - - - -
RS Stock No. 179-7908
Mfr. Part No.AL 8321 / ZPK / 1 / 50 / SW
MYR42.69
Each
units
Test Lead - 4 mm Safety Plug - 56.5mm 19A 600V CAT II 600V -10°C +70°C CAT II
RS Stock No. 179-9408
Mfr. Part No.BU-PB36-0
MYR34.10
Each
units
Test Lead - 4 mm Banana Plug - 0.9m 15A 1000V - - - -
RS Stock No. 179-7910
Mfr. Part No.AL 8321 / ZPK / 1 / 50 / RT
MYR42.69
Each
units
Test Lead - 4 mm Safety Plug - 56.5mm 19A 600V CAT II 600V -10°C +70°C CAT II