Weidmuller Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 1.2mm Pin Diameter, 0.75mm² Wire Size, Blue

Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm² and crimp wire-end ferrules with the same cross section.
Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 and with DIN 6228. Automatic feeding of wire-end ferrules.
The wire-end ferrules are supplied in packs of 500 split into strips of 50 parts each (see stock numbers 204-6682, 204-6698, 204-6705, 204-6711 and 204-6727)
Stock number 204-6676 is a kit consisting of a carry case containing 1 x pliers, 250 x 1mm² wire-end ferrules and 250 x 1.5 mm² wire-end ferrules.
Stock number 286-1009 is a STRIPAX PLUS 2.5 crimp tool

Clamp down on wires in your circuit using this crimp bootlace ferrule from Weidmuller. It lets you fasten your cable to a highly conductive copper contact, so it transmits power and data smoothly to your circuit. As the unit's metal sleeve is resistant to corrosion and wear, you can rely on it in harsh environments. To wrap things up, robust PP insulation helps shield you from electric shock, so you'll be in safe hands when making electrical connections.

• Plastic collar thickness of 0.25mm for durability
• Compact external dimensions of 14 (L) x 3.3 (W) x 3.3mm (H) to fit into small spaces

• Control panels
• Security systems
• Consumer electronics

To connect your wire to this ferrule, strip the outer jacket and insulation from the end of your cable to reveal the stranded conductors. Insert the conductors through the plastic body of the ferrule until they fit into the metal tube and crimp them together. Use the hand crimping tool (286-1009) from Weidmuller's STRIPAX PLUS range to strip and crimp your cable smoothly.