Inductors

Inductors are a form of passive component similar to a capacitor; they’re designed to deal with magnetism and control magnetic flux.

Inductors, also known as coils, chokes or reactors, are characterised by inductance, which is the ratio of the voltage to the rate of change of current. They’re frequently used in radio equipment to block AC and allow DC. An example of this passive component being used day-to-day is the ferrite bead on your laptop's power cable, which is designed for reducing electrical noise.

Inductors are usually a length of wire wound to create a coil around a core material with high insulator properties. However, inductors are more than just a coil of wire with an insulating material in the middle, in application, inductors are a key component to a circuit.

We sell several types of inductor:

  • Wire-wound surface mount inductors – these are usually a wire coil wrapped around a magnetic component
  • Leaded inductors - come in two main categories and are used in low and high voltage situations
  • Multi-layer surface mount inductors - this is a style of coil which has several layers of wire wrapped around an inductor, with layers of insulation added to give a high inductance level.

We also carry inductor components for both EMI and RFI and a variety of wireless charging coils. Wireless charging coils are used for DC-DC currents and are used for inductive charging; any wireless charger runs using this inductive component.

Related Products
From Wurth Elektronik comes the WE-WPCC Series Qi ...
Description:
From Wurth Elektronik comes the WE-WPCC Series Qi wireless charging coils, an innovative wireless way to charge portable electronic devices such as mobile phones. Current charging technologies make it impossible to charge devices of different brands from a single energy ...
CV201210 series multilayer chip inductors are offered in ...
Description:
CV201210 series multilayer chip inductors are offered in a standard 0805 case size. They are low profile with height as low as 85 mm. These surface mount inductors have a nickel barrier and provide magnetic shielding.
0806 WE-PMI series power multilayer inductors with a ...
Description:
0806 WE-PMI series power multilayer inductors with a magnetically shielded construction to cut out cross talk. These WE-PMI power multilayer inductors are suitable for applications with high currents of up to 1.8A, have DCR values below 0.2Ω and an operating ...
Wurth WE-TCI Series 0201 multilayer ceramic inductors are ...
Description:
Wurth WE-TCI Series 0201 multilayer ceramic inductors are suitable for use in high frequency circuits. The windings are printed on ceramic substrate. These inductors offer stable inductance over temperature, inductive tolerances of 5%; ± 0.2 nH and an extremely high ...