Fluke FTPL-1 Fused Test Probe Lead, CAT III, CAT IV, 10A

View all Multimeter Leads

Subtotal (1 unit)*

MYR1,082.00

Add to Basket
Select or type quantity
Stocked by manufacturer
  • Ready to ship from 10 July 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per Unit
1 +MYR1,082.00

*price indicative

RS Stock No.:
880-1397
Distrelec Article No.:
176-00-063
Mfr. Part No.:
FTPL-1
Manufacturer:
Fluke
Find similar products by selecting one or more attributes.
Select all

Brand

Fluke

Lead Type

Test Probe Lead

Product Type

Multimeter Leads

Current

10A

Connector Type

Straight, Right Angle

Fused

Yes

Lead Length

1.5m

Safety Category Voltage

1000V

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

50°C

Safety Category Level

CAT III, CAT IV

Standards/Approvals

No

RoHS Status: Exempt

COO (Country of Origin):
TW

Fluke Multimeter Leads, 1.5m Lead Length, 10A Current - FTPL-1


This multimeter leads set provides fused test probes and silicone-insulated leads for safe voltage and continuity measurements in industrial environments. Designed for use where category-rated protection and clear live-voltage indication are required, the set pairs modular probes with a combination of straight and right-angle connectors and removable tip accessories for targeted probing.

Features & Benefits


• Built-in fuses rated 11A with 20kA interrupt limit for added protection
• Probes indicate live voltage even when a fuse has blown to avoid false zero readings
• 2mm threaded tips with removable 4mm spring contacts for flexible contact options
• Right-angle on one end and straight connector on the other for access in tight spaces
• Silicone-insulated 1.5m leads resist extremes from -20°C to 50°C for field use

**Applications**


• Suitable for on-site fault finding in electrical distribution panels
• Ideal for measurements on control systems in automation environments
• Used for component testing in electronics assembly and repair
• Can be used for diagnostic work on mechanical plant with limited probe clearance

How can I verify the fused probe before taking current measurements?


Check probe continuity with the meter

a fused probe must show continuity to enable current mode since the fuse disables current measurement when open.

Are the probe tips adaptable for probing closely spaced contacts?


Yes, the threaded 2mm tips accept removable insulated caps and 4mm spring contacts to reduce exposed metal and adapt to tight pitches.

What happens to voltage indication if a fuse opens during a live test?


The probes still permit an approximate voltage reading through the meter input impedance, but results vary by meter and should be confirmed by a continuity check.

What electrical categories and voltages do these leads support?


They are rated for CAT III at 1000V and CAT IV at 600V and for use up to a 10A continuous current rating.

Related links