Greenwich Instruments 0.02 kW Motor Controller, 24 V, 3 Phase, 2 A

View all Motor Controllers
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
RS Stock No.:
240-7920
Mfr. Part No.:
GSM 2
Manufacturer:
Greenwich Instruments
Find similar products by selecting one or more attributes.
Select all

Brand

Greenwich Instruments

Number of Phases

3

Product Type

Motor Controller

Supply Voltage

24 V

Output Voltage

5 V

Current Rating

2 A

Power Rating

0.02kW

Overall Length

61mm

Overall Width

46mm

Overall Depth

15 mm

Maximum Operating Temperature

65°C

Standards/Approvals

No

COO (Country of Origin):
GB
2 terminal blocks

Trimmer pot for adjusting on board clock

GSM2 Stepper Motor Drive Board


The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.

Features & Benefits


A stand alone drive board designed to drive a stepper motor in unipolar mode.

Directly compatible with any of the RS stepper motors up to 2A

4-phase unipolar motor drive up to 2A/40Vdc per phase

Full, half and wave modes selectable

Motor speed selectable via adjustable on-board clock or externally via logic connectors

Enable and disable inputs allow a variety of start/stop control options to be implemented

Logic input/outputs TTL LS and CMOS compatible

Open drain power MOSFET phase outputs

Note

Stepper motor must have four phases and either five, six or eight wires.

Caution

Turn OFF power supply before connecting or disconnecting any wiring. Disconnecting the motor with the power ON will destroy the drive board.

Supplied with

User instructions

Related links