Ewellix Makers in Motion LBBR 30-2LS/HV6 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- RS Stock No.:
- 284-9318
- Mfr. Part No.:
- LBBR 30-2LS/HV6
- Manufacturer:
- Ewellix Makers in Motion
This image is representative of the product range
Subtotal (1 unit)*
MYR330.67
FREE delivery for orders over RM 150.00
Stocked by manufacturer
- Ready to ship from 19 October 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 + | MYR330.67 |
*price indicative
- RS Stock No.:
- 284-9318
- Mfr. Part No.:
- LBBR 30-2LS/HV6
- Manufacturer:
- Ewellix Makers in Motion
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Length | 50mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 3150N | |
| Closure Type | Closed | |
| Material | Steel | |
| Base to Bore Centerline | 20mm | |
| Static Load Rating | 2700N | |
| Standards/Approvals | No | |
| Series | LBBR | |
| Select all | ||
|---|---|---|
Brand Ewellix Makers in Motion | ||
Product Type Bearing | ||
Length 50mm | ||
End Type Sealed | ||
Dynamic Load Rating 3150N | ||
Closure Type Closed | ||
Material Steel | ||
Base to Bore Centerline 20mm | ||
Static Load Rating 2700N | ||
Standards/Approvals No | ||
Series LBBR | ||
- COO (Country of Origin):
- DE
SKF Linear Bearings
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a corrosion inhibiting preservative.
Can be used on a wide variety of applications
ISO 10285
Coated with a corrosion inhibitor
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.