Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Guide Wheels
Linear Bearing Units
Linear Bearings
Linear Guide Blocks
Linear Guide Rails
Linear Guides
Linear Shaft Supports
Linear Shafts
Linear Slide Accessories
Linear Slide Rails
Linear Slides
Positioning Tables
Slewing Rings

2133 Products showing for Linear Motion

Sort By
Stocked by manufacturer
THK SR30 Series, SR30-600L(GK), Linear Guide Rail 30 mm width 600 mm Length
  • RS Stock No. 619-826
  • Mfr. Part No. SR30-600L(GK)
Subtotal (1 unit)
MYR706.82
MYR706.82/unit
In Stock
Igus T Series, TS-01-20-300, Linear Guide Rail 20 mm width 300 mm Length
  • RS Stock No. 311-3705
  • Mfr. Part No. TS-01-20-300
Subtotal (1 unit)
MYR161.83
MYR161.83/unit
In Stock
Ewellix Makers in Motion LBCR12 D-2LS Bearing with 12 mm ID 22 mm OD 1160 N 980 N
  • RS Stock No. 284-9740
  • Mfr. Part No. LBCR12 D-2LS
Subtotal (1 unit)
MYR376.51
MYR376.51/unit
Stocked by manufacturer
Igus SAM-16 Bearing with 16.5 mm ID 36 mm OD 8500 N
  • RS Stock No. 712-5027
  • Mfr. Part No. SAM-16
Subtotal (1 unit)
MYR45.66
MYR45.66/unit
Temporarily out of stock
INA Double Flat Cage Assembly, 2.5 mm roller diameter 9.8 mm
  • RS Stock No. 172-1191
  • Mfr. Part No. FF2535-ZW-0-2
Subtotal (1 unit)
MYR23.72
MYR23.72/unit
Stocked by manufacturer
THK SRS12 Series, SRS12-120LM(GK), Linear Guide Rail 12 mm width 120 mm Length
  • RS Stock No. 620-020
  • Mfr. Part No. SRS12-120LM(GK)
Subtotal (1 unit)
MYR226.75
MYR226.75/unit
Limited stock
THK Linear Guide Carriage HSR30LC1SS(GK) HSR Series, 48.9 kN Dynamic Load
  • RS Stock No. 217-5222
  • Mfr. Part No. HSR30LC1SS(GK)
Subtotal (1 unit)
MYR1,354.44
MYR1,354.44/unit
Stocked by manufacturer
NSK RA Series, R1A351000LCNF01PCZ, Linear Guide Rail 35 mm width 1 m Length
  • RS Stock No. 621-176
  • Mfr. Part No. R1A351000LCNF01PCZ
Subtotal (1 unit)
MYR2,500.30
MYR2,500.30/unit
Stocked by manufacturer
THK HSR30 Series, HSR30-280L(GK), Linear Guide Rail 30 mm width 280 mm Length
  • RS Stock No. 619-764
  • Mfr. Part No. HSR30-280L(GK)
Subtotal (1 unit)
MYR437.12
MYR437.12/unit
In Stock
Igus Linear Guide Carriage NW-02-40 DryLin N Series, 400 N Dynamic Load
  • RS Stock No. 448-5411
  • Mfr. Part No. NW-02-40
Subtotal (1 unit)
MYR68.09
MYR68.09/unit
In Stock
RS PRO Guide Block MGN Series, 540 N Dynamic Load
  • RS Stock No. 176-6655
Subtotal (1 unit)
MYR491.53
MYR491.53/unit
In Stock
Igus N Series, NS-01-40-600, Linear Guide Rail 40 mm width 600 mm Length
  • RS Stock No. 448-5483
  • Mfr. Part No. NS-01-40-600
Subtotal (1 unit)
MYR158.13
MYR158.13/unit
In Stock
IKO Nippon Thompson Slewing Ring with 80 mm OD
  • RS Stock No. 175-3620
  • Mfr. Part No. CRBFV2512ATUUT1
Subtotal (1 unit)
MYR1,309.80
MYR1,309.80/unit
In Stock
IKO Nippon Thompson Linear Guide LWLC3C1R60T0H, LWL
  • RS Stock No. 917-5948
  • Mfr. Part No. LWLC3C1R60T0H
Subtotal (1 unit)
MYR653.47
MYR653.47/unit
Stocked by manufacturer
THK HSR30 Series, HSR30-3000L(GK), Linear Guide Rail 30 mm width 3 m Length
  • RS Stock No. 619-950
  • Mfr. Part No. HSR30-3000L(GK)
Subtotal (1 unit)
MYR4,683.60
MYR4,683.60/unit
In Stock
Bosch Rexroth Linear Guide Carriage R044229401 R0442 Series, 2310 N Dynamic Load
  • RS Stock No. 409-599
  • Mfr. Part No. R044229401
Subtotal (1 unit)
MYR541.06
MYR541.06/unit
In Stock
THK Linear Guide Carriage SHS15V1SSC1(GK) SHS Series, 14200 N Dynamic Load
  • RS Stock No. 217-5231
  • Mfr. Part No. SHS15V1SSC1(GK)
Subtotal (1 unit)
MYR838.35
MYR838.35/unit
In Stock
THK Linear Guide Carriage SRS15MUU(GK) SRS Series, 6660 N Dynamic Load
  • RS Stock No. 217-5242
  • Mfr. Part No. SRS15MUU(GK)
Subtotal (1 unit)
MYR394.11
MYR394.11/unit
In Stock
INA Single Flat Cage Assembly, 3.5 mm roller diameter 17.8 mm
  • RS Stock No. 172-1194
  • Mfr. Part No. FF3525/0-2
Subtotal (1 unit)
MYR16.97
MYR16.97/unit
In Stock
Igus Guide Block WJ200UM-01-10-AL DryLin W Series, 1200 N Dynamic Load
  • RS Stock No. 192-5617
  • Mfr. Part No. WJ200UM-01-10-AL
Subtotal (1 unit)
MYR318.83
MYR318.83/unit
Results per page

Related links