Fluke I30S Current Clamp, 20A DC Max, AC/DC Adapter, 30 A AC Max, Voltage Output

Probe the power of your electronic devices using this current clamp from FLUKE. It has jaws that close around your conductors, so you can carry out tests without breaking the circuit. Need to adjust the current output in case of offsets? The built-in knob helps get the ball rolling by letting you reset it to zero. As an LED indicator blinks when the battery is low, you can easily stay on top of the unit's power status. Get the full measure of AC and DC current flow in your circuits by plugging this clamp into your oscilloscope or DMM.

• Accuracy rating of ±1% and ±2mA for reliable results
• Withstands overloads of up to 500A AC/DC for durable performance
• Cable length of 2m for convenient long-range connection
• Battery life of 30 hours for lasting operation
• Flexible strain relief helps prevent cable wear

• Electrical enclosures
• Automotive engineering
• Measuring instruments
• Lighting fixtures

CAT III 300V
IEC 61010-1
Pollution degree 2
IEC 61010-2-032
IEC 61326-1
CE certified
cCSAus certified
EN61010-1
EN61010-2-032

This clamp has a broad measuring range of 5mA to 30A DC and 30mA to 20A AC so you'll find it handy for testing both low-current and high-current appliances.

Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.

Alkaline PP3 battery, 4mm shrouded plug adaptor and operator’s manual.