Power Relays, Buy Electrical Power Relay Supply Online
Recently searched

    Power Relays

    Power relays serve as crucial components for controlling electrical power flow. They enable efficient and safe management of high-power loads, making them indispensable in diverse applications.

    What Are Power Relays?

    Power relays are electromechanical devices that are used to control the flow of electrical power in a circuit. They are commonly used in industrial and commercial applications to control large electrical loads, such as motors, heaters, and lighting systems.

    How Do Power Relays Work?

    Power relays consist of a coil, which generates a magnetic field when a current flows through it, and a set of contacts that are mechanically switched by the magnetic field.

    When the coil is energised, the contacts close, allowing current to flow through the relay and to the load. When the coil is de-energised, the contacts open, breaking the circuit and stopping the flow of current

    While many power relays operate with AC voltage, DC power relays are specifically designed to control the flow of direct current in a circuit.

    Contact Configuration of Power Relays

    The contact configuration of power relays is a crucial aspect that determines their functionality and suitability for specific applications. Power relays typically have multiple contact sets that switch simultaneously, allowing them to handle higher currents and voltages compared to general-purpose relays. Below are the common contact configurations found in power relays:

    Single Pole, Single Throw (SPST)

    SPST power relays have a single set of contacts that can be either normally open (NO) or normally closed (NC) when the relay is de-energised. These relays are suitable for basic switching applications where only one circuit needs to be controlled.

    Single Pole, Double Throw (SPDT)

    SPDT power relays, also known as changeover or transfer relays, have a single moving contact that can connect to either a normally open or normally closed contact. This configuration allows for switching between two circuits and is commonly used in applications where a load needs to be switched between two power sources.

    Double Pole, Single Throw (DPST)

    DPST power relays have two independent sets of contacts that switch simultaneously. Each set can be either normally open or normally closed. These relays are used when two separate circuits need to be controlled concurrently, such as switching both the line and neutral wires in an AC circuit.

    Double Pole, Double Throw (DPDT)

    DPDT power relays have two independent sets of changeover contacts, allowing for the simultaneous switching of two circuits. This configuration is useful when two loads need to be switched between two power sources or when a load needs to be switched between two different circuits.

    Latching Relays

    Latching power relays have a special contact configuration that allows them to maintain their state (open or closed) even after the control signal is removed. These relays are useful in applications where relay power needs to be maintained to a load until a specific event occurs, such as in alarm systems or emergency lighting.

    Auxiliary Contacts

    In addition to the main power contacts, some power relays may have auxiliary contacts that switch simultaneously with the main contacts. These auxiliary contacts can be used for monitoring purposes, such as indicating the state of the main contacts or triggering additional circuits.

    Applications Where Power Relays Are Used

    Power relays are used in a wide range of applications where electrical power needs to be controlled. Some common examples of applications where power relays are used include:

    • Motor control: Power relays are used to control the operation of electric motors in various industrial and commercial applications, such as pumps, conveyors, and HVAC systems. DC power relays are particularly common in applications involving battery-powered or automotive systems.
    • Lighting control: Power relays are used to control lighting systems, such as streetlights, outdoor lighting, and indoor lighting in commercial and industrial buildings.
    • Heating and cooling systems: Power relays are used to control the operation of heaters and cooling systems, such as air conditioners and refrigeration units.
    • Power distribution: Power relays are used to switch power between different parts of an electrical system, such as between a main power source and a backup power source.
    • Power factor correction: Power relays are used to correct the power factor in electrical systems, which helps to improve the efficiency of the system.
    • Uninterruptible power supplies (UPS): Power relays are used in UPS systems to switch between different power sources, such as between a battery backup and a main power source.
    • Security systems: Power relays are used in security systems to control the operation of various devices, such as door locks, alarms, and cameras.

    These are just a few examples of the many applications where power relays are used. Power relays are essential components in many electrical systems and are critical for ensuring the safe and efficient operation of these systems.

    Frequently Asked Questions About Power Relays

    1. What is the difference between a power relay and a normal relay?

    A power relay is specifically designed to handle high currents and voltages, making it suitable for switching large electrical loads such as motors, heaters, and industrial machinery. In contrast, a normal relay typically handles lower currents and voltages, often used for signal switching and control applications in electronics.

    2. How do I choose a power relay?

    Selecting the right power relay involves considering several factors. Firstly, identify the required relay’s electrical power rating, ensuring it can handle the maximum current and voltage of your load. Secondly, determine the appropriate contact configuration (single-pole, double-pole, etc.) and coil voltage. Additionally, consider features like time delays, auxiliary contacts, and surge suppression, depending on your application's needs. You can always explore our online relay catalogue to compare different models and their power relay prices.

    3. How do you test a power relay?

    Testing a power relay involves verifying its functionality. Begin by visually inspecting the relay for any signs of damage or wear. Then, apply the rated coil voltage and check if the contacts close correctly. Subsequently, remove the coil voltage and confirm the contacts open. Additionally, you can measure the coil resistance to ensure it falls within the specified range. If you're unsure about testing, seeking assistance from a qualified electrician is recommended.

    4. How long do power relays last?

    The lifespan of a power relay depends on factors like the load it switches, operating frequency, and environmental conditions. Generally, power relays can last for millions of cycles under normal operating conditions. However, frequent switching of high currents or exposure to harsh environments can reduce their lifespan. It's advisable to consult the manufacturer's specifications for the estimated lifespan of a specific power relay.

    5. Do power relays go bad?

    Yes, power relays can go bad over time due to wear and tear, electrical arcing, or exposure to contaminants. Common signs of a faulty relay include:

    • Sticking contacts: The relay contacts may fail to open or close properly, leading to continuous power flow or an open circuit.
    • Burnt contacts: Excessive current or arcing can damage the contacts, causing them to burn and create a high-resistance path.
    • Coil failure: The coil may burn out or develop an open circuit, preventing the relay from being energised.

    If you suspect a power relay has gone bad, it's important to replace it promptly to ensure the safe and efficient operation of your electrical system.

    If you have more questions or require specific information about our products, RS is here to help you find the right power relay solutions for your needs. You can buy power relays online conveniently through our website or contact our sales team for expert assistance.

    Delivery Information

    RS offers fast delivery of power relays and related accessories like safety relay sockets and DIN rail mounting kits. For more details on delivery services and fees, please refer to our Delivery page.

    5217 Products showing for Power Relays

    Finder
    -
    24V dc
    170mW
    SPDT
    3.35 kΩ
    PCB Mount
    6A
    6kV
    1
    Through Hole
    400V ac
    -
    -
    -
    -
    28mm
    5mm
    15mm
    -
    -
    Silver Alloy
    -
    10000000 (DC Mechanical) cycles, 60000 (Electrical) cycles
    +85°C
    -40°C
    34 Series
    -
    Finder
    -
    12V ac
    -
    SPDT
    -
    Plug-In Mount
    16A
    -
    1
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Finder
    -
    12V dc
    -
    -
    -
    Plug In
    7A
    -
    4
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Finder
    -
    5V dc
    -
    SPDT
    -
    PCB Mount
    12A
    -
    1
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    WAGO
    -
    12V dc
    -
    DPDT
    -
    Plug-In Mount
    8A
    -
    2
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TE Connectivity
    -
    12V dc
    400mW
    SPST
    360 Ω
    PCB Mount, Plug In
    12A
    -
    1
    Plug In
    400V ac
    -
    -
    -
    -
    29mm
    12.7mm
    15.7mm
    -
    -
    Silver Alloy
    29 x 12.7 x 15.7mm
    -
    -
    -
    Potter & Brumfield Power PCB Relay RT1
    -
    Idec
    -
    24V dc
    530mW
    SPDT
    1080Ω
    Plug In
    12A
    -
    1
    -
    -
    -
    -
    -
    -
    28.8mm
    27mm
    12.7mm
    -
    -
    Silver Alloy
    -
    -
    -
    -
    RJ
    -
    Omron
    -
    48V ac
    -
    DPDT
    -
    Plug In
    10A
    -
    2
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    MY2IN
    -
    Schneider Electric
    -
    24 V dc, 48V ac
    -
    SPST
    -
    DIN Rail
    16A
    -
    1
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Yes
    Green Premium
    -
    -
    -
    -
    -
    -
    -
    Omron
    -
    24V dc
    -
    DPST
    -
    PCB Mount
    20A
    -
    2
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Phoenix Contact
    -
    60V dc
    490mW
    -
    7340 ±15 % O
    DIN Rail
    16A
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    REL-MR- 60DC/21HC
    -
    Omron
    -
    24V dc
    -
    SPDT
    1440Ω
    PCB Mount
    -
    -
    -
    Through Hole
    -
    -
    Power
    -
    -
    20.3mm
    10.3mm
    15.8mm
    -
    -
    Silver
    -
    -
    +85°C
    -40°C
    -
    -
    Finder
    -
    24V dc
    170mW
    SPDT
    3350 Ω
    DIN Rail
    6A
    -
    1
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    34 Series
    -
    Omron
    -
    12V dc
    -
    SPST
    180 Ω
    PCB Mount
    15A
    -
    1
    Through Hole
    -
    -
    Power
    -
    -
    30.5mm
    19.5mm
    30.5mm
    -
    -
    Silver
    -
    -
    +55°C
    -25°C
    G4W
    -
    Finder
    -
    12V dc
    -
    DPST
    -
    DIN Rail
    16A
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TE Connectivity
    -
    24V dc
    200mW
    SPST
    45Ω
    PCB Mount
    3A
    4kVrms
    1
    Through Hole
    250V
    30V dc
    Home Appliances
    -
    -
    20.4mm
    7mm
    15mm
    -
    -
    Silver Alloy
    -
    >10000000 (Mechanical) operations, 100000 (Electrical) operations
    +85°C
    -40°C
    PCJ
    CQC 03001008593, CSA LR48471-211, UL E58304, VDE 40009151
    TE Connectivity
    -
    24V ac
    -
    DPDT
    350 Ω
    PCB Mount
    8A
    -
    2
    Through Hole
    -
    -
    Power
    -
    -
    29mm
    12.7mm
    15.7mm
    -
    -
    Silver Nickel Alloy
    -
    -
    +70°C
    -40°C
    RT2
    -
    TE Connectivity
    -
    230V ac
    -
    SPST
    32500Ω
    PCB Mount
    16A
    -
    1
    Through Hole
    -
    -
    Power
    -
    -
    29mm
    12.7mm
    15.7mm
    -
    -
    Silver Nickel Alloy
    -
    -
    +70°C
    -40°C
    RT1
    -
    Omron
    -
    24V dc
    530mW
    SPST
    1.1 kΩ
    PCB Mount
    10A
    5kV ac
    1
    Plug In
    380V ac
    125V dc
    Power
    -
    -
    29mm
    13mm
    25.5mm
    -
    -
    Silver Alloy
    -
    100000 cycles
    +70°C
    -40°C
    G2R-1
    -
    Omron
    -
    230V ac
    1.7W
    SPDT
    -
    DIN Rail
    6A
    4kV ac
    1
    Push In
    440V ac
    125V dc
    -
    -
    -
    6.2mm
    78mm
    90mm
    -
    -
    Silver Alloy
    -
    50000 (Electrical-NC) operations, 5000000 (Mechanical) operations, 70000 (Electrical-NO) operations
    +55°C
    -40°C
    G2RV
    CE, CULus, TUV Certification, UL 508 File No. E41643
    Results per page