Threading Taps

Threading taps are a tool used to create screw threads (tapping) into a pre-drilled hole, to create a clean fitting for bolts in metals and plastics. Used in engineering and manufacturing, threading taps work like a drill but due to the unique shape of a tap, when screwed into a piece of material, screw threads are created. Threading taps must be used in a predrilled hole and cannot be used for drilling entire holes.


The difference between taps and dies is that taps are used to create or repair threads in holes which is ideal for nuts. Dies are used to cut threads on materials such as steel rods to allow a fitting to be screwed on and attached (threading). The tap is designed for internal thread cutting, so this would be used on the fastener hole or a nut, whereas a die is used for the external thread, like on a bolt. In other words, tapping uses the tap part of the set and creates internal threads and threading is the process used by the die to cut external threads.


Threading Taps are available in HSS (high-speed steel) and carbide and can be used by hand or machine. Our range of threading taps offers the best tool for every machining method or process to meet all your requirements. Threading taps can be used with a tap wrench or power tool and are available in various sizes to accommodate a range of applications.


Taps can be used by machinists in different ways for different applications:


  • Taper taps or starter taps, are used to initially start a new thread with the first 7-10 threads having a flatter profile than those further up the shaft.

  • Plug taps are similar to taper taps but only have 3-5 starting rows ground down leaving more shaft to create a thread.

  • Bottom taps are square in profile with no ground down threads and are used after a taper or plug tap has been used. Their full length cutting shape allow for threads to be cut at the very bottom of a hole for maximum thread length.

  • Spiral flute taps – for blind hole applications

  • Spiral point taps – push chips forward, ideal for through-hole applications

  • Straight flute taps – most commonly, designed for short chipping materials

  • Forming taps – compresses to produce a thread rather than cutting

  • Taps come in both Metric and Imperial dimensions and can have different shank types. Threading taps are used in conjunction with a tap wrench so always consider the maximum side tap your wrench can hold when purchasing.

...
Read more Read less

Filters

Viewing 41 - 60 of 632 products
Results per page
Description Price Set Type Thread Size Type Pitch Thread Standard Thread Direction Number of Pieces Overall Length Shank Standard Hand/Machine Tap Material Shank Diameter Shank Type Ring Colour
RS Stock No. 340-6934
BrandRS PRO
MYR255.81
1 Set
Set(s)
Threading Tap Set - - - - - 6 - - - - - - -
RS Stock No. 455-980
BrandRS PRO
MYR70.74
Each
units
Threading Tap #2-56 Spiral Point - UNC - 1 44.5 mm - - HSS 2.8 mm - -
RS Stock No. 673-4702
BrandRS PRO
MYR794.36
1 Set
Set(s)
Threading Tap Set - - - - - 22 - - - HSS - - -
RS Stock No. 152-536
BrandRS PRO
MYR47.09
Each
units
Threading Tap M6 Straight Flute, Taper 1.0mm Metric - 1 - - Hand Tap HSS - - -
RS Stock No. 152-328
BrandRS PRO
MYR22.19
1 Set
Set(s)
Straight Flute Tap #2 UNC Straight Flute Tap - - - 2 - - - HSS - - -
RS Stock No. 151-909
BrandRS PRO
MYR67.91
1 Set
Set(s)
Straight Flute Tap #4 BA Straight Flute Tap - - - 2 - - - HSS - - -
RS Stock No. 522-7569
BrandRS PRO
MYR82.71
Each
units
Threading Tap M8 Second, Straight Flute 1.0mm Metric Fine - 1 66 mm - - HSS 6.3 mm - -
RS Stock No. 152-176
BrandRS PRO
MYR144.17
1 Set
Set(s)
Straight Flute Tap 1/4 in BSP Straight Flute Tap - - - 2 - - - HSS - - -
RS Stock No. 152-003
BrandRS PRO
MYR107.32
Each
units
Threading Tap M10 Spiral Flute, Second 1.5mm Metric - 1 - - - HSS - - -
RS Stock No. 152-413
BrandRS PRO
MYR225.98
1 Set
Set(s)
Straight Flute Tap M25 Straight Flute Tap - - - 2 - - - HSS - - -
RS Stock No. 152-120
BrandRS PRO
MYR46.14
Each
units
Threading Tap M2 Straight Flute, Plug 0.4mm Metric - 1 - - Hand Tap HSS - - -
RS Stock No. 749-5682
BrandRS PRO
MYR33.82
1 Set
Set(s)
Threading Tap Set - - - - - 2 - - - HSS - - -
RS Stock No. 669-9407
BrandRS PRO
MYR310.37
1 Set
Set(s)
Threading Tap Set - - - - - 6 - - - - - - -
RS Stock No. 668-1074
BrandRS PRO
MYR106.51
1 Set
Set(s)
Threading Tap M5 Straight Flute 0.8mm Metric Left Hand 1 58 mm - - HSS 5 mm - -
RS Stock No. 917-2599
BrandRS PRO
MYR374.49
1 Set
Set(s)
Threading Tap Set - Hand tap and drill set - - - 29 - - - High Speed Steel - - -
RS Stock No. 669-9384
BrandRS PRO
MYR40.41
Each
units
Threading Tap M5 Hexagon Drive Tap 0.8mm Metric - 1 35 mm - - HSS - - -
RS Stock No. 152-075
BrandRS PRO
MYR38.47
Each
units
Threading Tap M3 Straight Flute, Second 0.5mm Metric - 1 - - Hand Tap HSS - - -
RS Stock No. 152-110
BrandRS PRO
MYR43.86
Each
units
Threading Tap M7 Straight Flute, Plug 1.0mm Metric - 1 - - Hand Tap HSS - - -
RS Stock No. 669-9381
BrandRS PRO
MYR36.72
Each
units
Threading Tap M4 Hexagon Drive Tap 0.7mm Metric - 1 35 mm - - HSS - - -
RS Stock No. 455-958
BrandRS PRO
MYR86.44
Each
units
Threading Tap M12 Spiral Point 1.75mm Metric - 1 89 mm - Machine Tap HSS 9 mm - -
Related Products
Introducing 2 piece HSS (high speed steel) hand ...
Description:
Introducing 2 piece HSS (high speed steel) hand tap sets from our trusted own brand RS PRO, a range of sets with tools ideal for cutting thread into material such as metal bolts. The durable taps included in these sets ...
Introducing RS PRO 6 piece HSS spiral flute ...
Description:
Introducing RS PRO 6 piece HSS spiral flute thread tap set, a selection of high quality and professional threading taps ideal for cutting thread (tapping) by hand or machine, into drilled holes in materials such as metal and wood.Our range ...
The Greenlee steel Drill/Tap kit set does complete ...
Description:
The Greenlee steel Drill/Tap kit set does complete hole drilling, tapping and deburring/countersinking in one operation with power drill which saves labour and time. It is made from hardened high-speed steel and carbon steel for longer life. The kit consists ...
A range of manual fine metric thread HSS ...
Description:
A range of manual fine metric thread HSS taps offered in a 2-part set (roughing and finishing).Each set consists of a roughing tap bit which has a five-thread entry and the finisher has two. The tap bit tolerance class is ...