Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP

RS Stock No.:: 153-1916
Mfr. Part No.:: PCMF3USB3SZ
Manufacturer:: Nexperia

Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP

Bulk discount available

View bulk pricing options

Subtotal (1 pack of 5 units)*

MYR33.53

Stock information currently inaccessible - Please check back later

Units	Per Unit	Per Pack*
5 - 1120	MYR6.706	MYR33.53
1125 - 2245	MYR6.37	MYR31.85
2250 +	MYR6.052	MYR30.26

*price indicative

RS Stock No.:: 153-1916
Mfr. Part No.:: PCMF3USB3SZ
Manufacturer:: Nexperia

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Nexperia
	Direction Type	Uni-Directional
	Diode Configuration	Complex Array
	Product Type	ESD Protection Diode
	Minimum Breakdown Voltage Vbr	4.5V
	Mount Type	Surface
	Package Type	WLCSP
	Maximum Reverse Stand-off Voltage Vwm	5V
	Pin Count	15
	Clamping Voltage VC	6.5V
	Test Current It	50mA
	ESD Protection	Yes
	Maximum Peak Pulse Current Ippm	4A
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Number of Elements per Chip	2
	Height	380μm
	Length	2.42mm
	Width	1.22mm
	Maximum Reverse Leakage Current	100nA

	Select all
	Brand Nexperia
	Direction Type Uni-Directional
	Diode Configuration Complex Array
	Product Type ESD Protection Diode
	Minimum Breakdown Voltage Vbr 4.5V
	Mount Type Surface
	Package Type WLCSP
	Maximum Reverse Stand-off Voltage Vwm 5V
	Pin Count 15
	Clamping Voltage VC 6.5V
	Test Current It 50mA
	ESD Protection Yes
	Maximum Peak Pulse Current Ippm 4A
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Number of Elements per Chip 2
	Height 380μm
	Length 2.42mm
	Width 1.22mm
	Maximum Reverse Leakage Current 100nA

Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes

Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz

Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies

ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)

Deep snap-back for optimized SoC protection against ESD strikes

Very thin package (0.5 mm max package height)

All LVDS signals needing a passband up to 2 GHz

Nexperia PCMF3USB3SZ 2-Element Uni-Directional ESD Protection Diode, 15-Pin WLCSP

Bulk pricing options

Related links