Electrotherm Digital Transducer

Resistance sensors with a 0 to 10 V current output. The LKM 264 transducer has been designed for installation on a 35-mm top hat rail. A PC and programming cable are used to specify sensor type, measuring range, and circuit type.

Minor corrections can be carried out with the zero point controller. The sensor is connected with a 3-lead or 4-lead circuit.

Total measuring range: -200 to 850°C Pt100, -200 to 300°C Pt1000, -60 to 250°C Ni100/ (TK 5000/6180), -60 to 200°C Ni1000 (TK 5000/6180), 0 to 400, 0 to 2000 resistors

Connection type: 2-/3-/4- wire circuit programmable

Zero: programmable

Span: programmable

Measuring current: 0.25mA

Current consumption: max.10mA

Loop voltage: 15 to 35VDC, 15 to 26VAC polarity-safe

Linearity error: 0.1%FS

Resolution: 14 bit

Linearisation accuracy: 0.1 K

Measuring rate: 2/s

Output: 0 to 10V other output voltages possible

Probe break: 10V

Short-circuit: 0V

Clamping range: screw clamps 0.2 to 2.5mm²

Temperature coefficient: 0.015 K/°C set temperature range, 0 to 100°C

Operating temperature range: -25 to 70°C

Mounting: 35mm DIN-rail

Housing: Polycarbonate 75x25x53mm

Weight: approx. 60g