Turck IM(X)12 Series Frequency Transducer, Frequency Input, Relay Output, 10V dc, 30 V dc Supply, UL, Ex
- RS Stock No.:
- 281-6791
- Mfr. Part No.:
- IM12-FI01-1SF-1R-0/24VDC
- Manufacturer:
- Turck
Subtotal (1 unit)*
MYR2,460.56
FREE delivery for orders over RM 150.00
In Stock
- Plus 3 unit(s) shipping from 10 August 2026
- Plus 3 unit(s) shipping from 21 September 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 + | MYR2,460.56 |
*price indicative
- RS Stock No.:
- 281-6791
- Mfr. Part No.:
- IM12-FI01-1SF-1R-0/24VDC
- Manufacturer:
- Turck
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Turck | |
| Product Type | Frequency Transducer | |
| Input Signal Type | Frequency | |
| Output Signal Type | Relay | |
| Input Range | NAMUR Input - 8.2 V dc, 3-Wire Input - 12 V dc | |
| Output Range | 250 V ac, 30 V dc | |
| Supply Voltage | 10, 30V dc | |
| Hazardous Area Certification | UL, Ex | |
| Maximum Operating Temperature | 70°C | |
| Minimum Operating Temperature | -25°C | |
| IP Rating | IP20 | |
| Standards/Approvals | No | |
| Series | IM(X)12 | |
| Select all | ||
|---|---|---|
Brand Turck | ||
Product Type Frequency Transducer | ||
Input Signal Type Frequency | ||
Output Signal Type Relay | ||
Input Range NAMUR Input - 8.2 V dc, 3-Wire Input - 12 V dc | ||
Output Range 250 V ac, 30 V dc | ||
Supply Voltage 10, 30V dc | ||
Hazardous Area Certification UL, Ex | ||
Maximum Operating Temperature 70°C | ||
Minimum Operating Temperature -25°C | ||
IP Rating IP20 | ||
Standards/Approvals No | ||
Series IM(X)12 | ||
- COO (Country of Origin):
- DE
The Turck frequency transducer is equipped with intrinsically safe input circuits and issues a galvanically isolated transmission of frequency signals up to 20,000 Hz from the explosion-hazardous area to the safe area. This device is used for monitoring limit values. The device is suitable for use in Zone 2. A changeover relay is available on the output side. The device can be powered from a power bridge that also transmits a collective fault signal.
Input circuits monitored for wire break and short circuit
Parameterized via DIP/rotary coding switch
Complete galvanic isolation
Input reverse-polarity protected
Removable spring type terminals