Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- RS Stock No.:
- 130-0883
- Mfr. Part No.:
- XY2CE2A250EX
- Manufacturer:
- Telemecanique Sensors
Subtotal (1 unit)*
MYR2,362.56
Stock information currently inaccessible - Please check back later
Units | Per Unit |
|---|---|
| 1 + | MYR2,362.56 |
*price indicative
- RS Stock No.:
- 130-0883
- Mfr. Part No.:
- XY2CE2A250EX
- Manufacturer:
- Telemecanique Sensors
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 1 NO/1 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Contact DC Voltage | 250V dc | |
| Contact AC Voltage | 240V ac | |
| Minimum Operating Temperature | -25°C | |
| E-Stop Button | Yes | |
| Reset Button | Yes | |
| Contact Current | 3A | |
| Maximum Operating Temperature | 70°C | |
| Width | 105mm | |
| Standards/Approvals | EN/IEC 60947-5-5, CSA C 22-2, CCC, CSA, UL 508, UL (NISD), EAC | |
| Length | 229mm | |
| Depth | 142mm | |
| Housing Material | Stainless Steel | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | M20 | |
| Select all | ||
|---|---|---|
Brand Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 1 NO/1 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Contact DC Voltage 250V dc | ||
Contact AC Voltage 240V ac | ||
Minimum Operating Temperature -25°C | ||
E-Stop Button Yes | ||
Reset Button Yes | ||
Contact Current 3A | ||
Maximum Operating Temperature 70°C | ||
Width 105mm | ||
Standards/Approvals EN/IEC 60947-5-5, CSA C 22-2, CCC, CSA, UL 508, UL (NISD), EAC | ||
Length 229mm | ||
Depth 142mm | ||
Housing Material Stainless Steel | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry M20 | ||
Telemecanique XY2CE EX ATEX Emergency Stop Rope Pull Switches
Telemecanique XY2CE EX ATEX emergency stop rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Related links
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm, Right Side
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 1 NO/1 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 2 NO/2 NC