SKF 32026 X Taper 130 mm ID Roller Bearing, 200 mm OD
- RS Stock No.:
- 208-0032
- Mfr. Part No.:
- 32026 X
- Manufacturer:
- SKF
Subtotal (1 unit)*
MYR2,277.64
FREE delivery for orders over RM 150.00
Temporarily out of stock
- Shipping from 02 November 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 + | MYR2,277.64 |
*price indicative
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
MYR1,521.66
- RS Stock No.:
- 208-0032
- Mfr. Part No.:
- 32026 X
- Manufacturer:
- SKF
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 130mm | |
| Bore Type | Parallel | |
| Static Load Rating | 540kN | |
| Cup Width | 34mm | |
| Number of Rows | 1 | |
| Cone Width | 45mm | |
| Limiting Speed | 3000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 388kN | |
| End Type | Shielded | |
| Outside Diameter | 200mm | |
| Bearing Type | Taper | |
| Select all | ||
|---|---|---|
Brand SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 130mm | ||
Bore Type Parallel | ||
Static Load Rating 540kN | ||
Cup Width 34mm | ||
Number of Rows 1 | ||
Cone Width 45mm | ||
Limiting Speed 3000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 388kN | ||
End Type Shielded | ||
Outside Diameter 200mm | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.