Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP

RS Stock No.:: 178-4853
Mfr. Part No.:: HV9120P-G
Manufacturer:: Microchip

Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP

This image is representative of the product range

Bulk discount available

Subtotal (1 tube of 24 units)*

MYR272.688

FREE delivery for orders over RM 500.00

In Stock

Plus 1,704 unit(s) shipping from 15 December 2025

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per Unit	Per Tube*
24 - 24	MYR11.362	MYR272.69
48 - 72	MYR11.112	MYR266.69
96 +	MYR10.908	MYR261.79

*price indicative

RS Stock No.:: 178-4853
Mfr. Part No.:: HV9120P-G
Manufacturer:: Microchip

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Microchip
	Maximum Switching Frequency	3 MHz
	Output Voltage	4.16 V
	Output Current	10 mA
	Control Method	Current, Voltage
	Number of Outputs	1
	Fall Time	75ns
	Mounting Type	Through Hole
	Package Type	PDIP
	Rise Time	75ns
	Pin Count	16
	Maximum Duty Cycle	49.6%
	Dimensions	0.81 x 0.28 x 0.195in
	PWM Controller Type	Current Mode
	Length	20.57mm
	Width	0.28in
	Height	4.95mm
	Maximum Operating Temperature	+125 °C
	Maximum Operating Supply Voltage	13.5 V
	Minimum Operating Supply Voltage	9 V
	Minimum Operating Temperature	-55 °C

	Select all
	Brand Microchip
	Maximum Switching Frequency 3 MHz
	Output Voltage 4.16 V
	Output Current 10 mA
	Control Method Current, Voltage
	Number of Outputs 1
	Fall Time 75ns
	Mounting Type Through Hole
	Package Type PDIP
	Rise Time 75ns
	Pin Count 16
	Maximum Duty Cycle 49.6%
	Dimensions 0.81 x 0.28 x 0.195in
	PWM Controller Type Current Mode
	Length 20.57mm
	Width 0.28in
	Height 4.95mm
	Maximum Operating Temperature +125 °C
	Maximum Operating Supply Voltage 13.5 V
	Minimum Operating Supply Voltage 9 V
	Minimum Operating Temperature -55 °C

Datasheet

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

Features

10 to 450V input voltage range
<1.3 mA supply current
>1.0 MHz clock
>20:1 dynamic range @ 500 kHz
Low internal noise

Typical Applications

Off-line high frequency power supplies
Universal input power supplies
High density power supplies
Very high efficiency power supplies
Extra wide load range power supplies

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

PWM (Pulse Width Modulation) Controllers, Microchip