Melexis Surface Hall Effect Sensor 1.6 V 3.6 V, UTQFN, 6-Pin
- RS Stock No.:
- 194-2954P
- Mfr. Part No.:
- MLX92213ELD-AAA-000-RE
- Manufacturer:
- Melexis
This image is representative of the product range
Bulk discount available
Subtotal 1250 units (supplied on a reel)*
MYR3,130.00
FREE delivery for orders over RM 500.00
Temporarily out of stock
- Shipping from 29 April 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1250 - 2475 | MYR2.504 |
| 2500 + | MYR2.379 |
*price indicative
- RS Stock No.:
- 194-2954P
- Mfr. Part No.:
- MLX92213ELD-AAA-000-RE
- Manufacturer:
- Melexis
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Melexis | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Latch | |
| Minimum Supply Voltage | 1.6V | |
| Package Type | UTQFN | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 85°C | |
| Width | 2 mm | |
| Length | 1.5mm | |
| Series | MLX92213 | |
| Height | 0.35mm | |
| Standards/Approvals | Pb Free | |
| Automotive Standard | No | |
| Response Time | 1.90ms | |
| Select all | ||
|---|---|---|
Brand Melexis | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Latch | ||
Minimum Supply Voltage 1.6V | ||
Package Type UTQFN | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 85°C | ||
Width 2 mm | ||
Length 1.5mm | ||
Series MLX92213 | ||
Height 0.35mm | ||
Standards/Approvals Pb Free | ||
Automotive Standard No | ||
Response Time 1.90ms | ||
- COO (Country of Origin):
- MY
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.