ABB Temperature Monitoring Relay, 1 Phase, SPST, DIN Rail
- RS Stock No.:
- 464-508
- Mfr. Part No.:
- 1SVR550800R9300 CM-MSE
- Manufacturer:
- ABB
Subtotal (1 unit)*
MYR383.27
FREE delivery for orders over RM 500.00
In Stock
- 3 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit |
|---|---|
| 1 + | MYR383.27 |
*price indicative
- RS Stock No.:
- 464-508
- Mfr. Part No.:
- 1SVR550800R9300 CM-MSE
- Manufacturer:
- ABB
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ABB | |
| Monitoring Application | Temperature | |
| Electrical Phase | 1 | |
| Contact Configuration | SPST | |
| Mounting Type | DIN Rail | |
| Temperature Sensitivity | Overtemperature, Undertemperature | |
| Series | CM-MSE | |
| Standards Met | CCC, CE, CSA, EAC, UL | |
| Operating Temperature Range | +60°C | |
| Length | 78.5mm | |
| Height | 78mm | |
| Current Range | 2 → 4A | |
| Dimensions | 78.5 x 22.5 x 78mm | |
| Maximum Operating Temperature | +60°C | |
| Width | 22.5mm | |
| Minimum Operating Temperature | -20°C | |
| Terminal Type | Screw | |
| Select all | ||
|---|---|---|
Brand ABB | ||
Monitoring Application Temperature | ||
Electrical Phase 1 | ||
Contact Configuration SPST | ||
Mounting Type DIN Rail | ||
Temperature Sensitivity Overtemperature, Undertemperature | ||
Series CM-MSE | ||
Standards Met CCC, CE, CSA, EAC, UL | ||
Operating Temperature Range +60°C | ||
Length 78.5mm | ||
Height 78mm | ||
Current Range 2 → 4A | ||
Dimensions 78.5 x 22.5 x 78mm | ||
Maximum Operating Temperature +60°C | ||
Width 22.5mm | ||
Minimum Operating Temperature -20°C | ||
Terminal Type Screw | ||
ABB Monitoring Relay, 4kV Rated Impulse Withstand Voltage, 50/60Hz Supply Voltage Frequency - CM-MSE Series - 1SVR550800R9300 CM-MSE
Keeping tabs on temperature is a cinch with this monitoring relay from ABB. You can use it to control motors hooked up to a PTE sensor (such as 103-8133). If your motor runs too hot, this unit's internal wire system snaps and your equipment is reset, to prevent damage caused by overheating. A long electrical life of 100,000 cycles means you can rely on this component over long periods. Install it alongside small engines, hot-air ventilators or heating installations to keep them running smoothly.
Features & Benefits
• Works safely in a temperature range between -20°C and +60°C
• Snap-on mounting makes installation on a DIN rail a breeze
• Low 110g weight won't put strain on your setup
• Snap-on mounting makes installation on a DIN rail a breeze
• Low 110g weight won't put strain on your setup
Applications
• Manufacturing lines
• Power generation and distribution facilities
• Water treatment plants
• Data centres
• Power generation and distribution facilities
• Water treatment plants
• Data centres
Where can I use this monitoring relay?
This unit's housing is IP50-rated and its terminals have an IP20 rating. This means it's touch-proof and protected from objects larger than 12mm. For optimal performance, mount it in a clean, indoor area or sealed cabinet.
Related links
- ABB Temperature Monitoring Relay SPST, DIN Rail
- Tele Temperature Monitoring Relay SPST, DIN Rail
- ABB Phase Monitoring Relay 3 Phase DIN Rail
- ABB Temperature Monitoring Relay SPDT, DIN Rail
- ABB Temperature Monitoring Relay DPDT, DIN Rail
- ABB Temperature Monitoring Relay DPDT DIN Rail
- Omron Current Monitoring Relay SPST, DIN Rail
- Carlo Gavazzi Current Monitoring Relay SPST, DIN Rail
