3M Hot Melt Glue Gun Nozzle for use with EPX Duo-Pak adhesives

Polyurethane structural adhesives fast curing at ambient temperature or when warm, to form a flexible, solid and impact-resistant seal.
They adhere well to painted or primed metal surfaces and wood and also to many plastics.
Presented in a two-component syringe.
DP 609: cream/brown colour; DP610: transparent.
Adhesive is extruded and applied using a manual EPX application gun and a nozzle to achieve a uniform blend of components. These two items are ordered separately.

Attach this nozzle from 3M to hot glue guns used to apply EPX Duo-Pak adhesives. It connects easily to the mechanism to enable precision glueing in a range of industrial applications. EPX Duo-Pak adhesives are 3M's high-strength, two-component structural adhesives that can often deliver bond strength equal to or greater than that of the materials being bonded. The adhesives are formulated for permanent load-bearing bonds and accommodate materials from metal and glass to plastic and rubber.

• Apply adhesive at selected points or in a continuous bead to create a strong bond• Structural adhesives improve stress distribution by achieving stronger, sturdier structures

• Product assembly• Electronics industry• Industrial machinery• Automotive manufacturing

This nozzle is strongly advised when applying EPX Due-Pak adhesives, which offer load-bearing strength and long lasting effectiveness. Once the adhesive cartridge's tip is unscrewed, simply fit this nozzle over the cartridge and insert the cartridge into the glue gun. The nozzle will properly mix the adhesive's two components as it extrudes from the end of the nozzle.