STMicroelectronics STDRIVE101 3 24-Pin, QFN

The STDRIVE101 is a low voltage gate driver suitable for driving three-phase brushless motors.

It is a single-chip with three half-bridge gate drivers for N-channel power MOSFETs. Each driver has a current capability of 600 mA (sink/source). It integrates a low drop linear regulator generating the supply voltage for both low-side and high-side gate drivers through a bootstrap circuitry.

The device provides Under Voltage Lock Out (UVLO) on both the low-side and high-side sections, preventing the power switches from operating in low efficiency or dangerous conditions.

The control logic integrated into the STDRIVE101 allows two input strategies (high-side and low-side or enable and PWM driving signals). The driving method is selected according to DT/MODE pin. In both cases, prevention from cross conduction is ensured by interlocking or internally generated deadtime.

The STDRIVE101 also features a VDS monitoring protection for each external MOSFET, thermal shutdown and can be put in the standby mode to reduce the power consumption.

The device is available in a VFQFPN 4x4 24 leads package option.

Operating voltage from 5.5 to 75 V

600 mA sink/source current capability

3.3 V and 5 V control logic

Two input strategies:

• ENx/INx with adjustable deadtime generation

• INHx/INLx with interlocking

Matched propagation delay for all channels

Very short propagation delay: 40 ns

Integrated bootstrap diodes

12 V LDO linear regulator (50 mA max.)

Embedded VDS monitor for each external MOSFET

Overcurrent comparator

UVLO and thermal shutdown protection

Standby mode for low current consumption operation

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.