Sensata Cynergy3 RSF70 Series Horizontal External Polyphenylene Sulfide Float Switch, Float, 1m Cable, SPNO, 240V ac

RS Stock No.:: 338-9750
Mfr. Part No.:: RSF76Y100RV
Manufacturer:: Sensata / Cynergy3

Sensata Cynergy3 RSF70 Series Horizontal External Polyphenylene Sulfide Float Switch, Float, 1m Cable, SPNO, 240V ac

View all Float Switches

245 In Global stock for delivery in 4-6 working days, delivery time may vary for certain locations or FTZ

Price Each

MYR128.52

Units	Per Unit
1 - 5	MYR128.52
6 - 24	MYR125.82
25 +	MYR122.05

RS Stock No.:: 338-9750
Mfr. Part No.:: RSF76Y100RV
Manufacturer:: Sensata / Cynergy3

Cynergy3 Horizontal Float Switches

Horizontal float switches with a low-cost compact design and WRAS approval. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

Features & Benefits

Low cost compact design

Available in Nylon, Polypropylene and Poly Phenylene Sulfide (PPS)

Consists of reedswitch and pivoted actuator magnet

Can be used for N/O or N/C operation

Internal and external mounting options available

All units WRAS approved

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
• UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

Approvals

UL recognised

Sensata Cynergy3 Horizontal External Float Switch, NO/NC, 600mA - RSF70 Series - RSF76Y100RV

This float switch is designed for fitting through a tank wall from the outside where access to the internal fitting is not possible. The float switch is fitted in a 23 mm dia. hole in the tank from the outside and secured by a compression seal with a backnut.

Features and Benefits

PPS material
External mounting
Compression seal
Flying lead
WRAS approved

Product Application Information

This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include vending machines, commercial dishwashers and auxiliary tanks on vehicles

What kind of load is this type of switch suitable for?

This float switch is suitable for signal switching and use with transistorised input/low-power suppressed-coil miniature relays. It's not suitable for switching inductive or inrush loads such as those found in filament lamps.

Attribute	Value
Device Type	Float
Mounting Type	Horizontal External
Switch Output	SPNO
Body Material	Polyphenylene Sulfide
Cable Length	1m
Minimum Operating Temperature	-10°C
Maximum Operating Temperature	+120°C
Maximum AC Voltage	240V
Maximum DC Voltage	120V
Maximum Current	600 mA
Gasket Material	Viton
Series	RSF70
Standards Met	WRAS