Nexperia 74HC574D,652 8 Octal D Type Flip Flop HC, 3 State, 20-Pin SOIC
- RS Stock No.:
- 124-2263
- Mfr. Part No.:
- 74HC574D,652
- Manufacturer:
- Nexperia
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 124-2263
- Mfr. Part No.:
- 74HC574D,652
- Manufacturer:
- Nexperia
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Product Type | Octal D Type Flip Flop | |
| Logic Family | HC | |
| Input Type | Single Ended | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 2V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Flip-Flop Type | Type D | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Trigger Type | Positive Edge | |
| Minimum Operating Temperature | -40°C | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | JEDEC No. 7A | |
| Length | 13mm | |
| Series | 74HC | |
| Height | 2.45mm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Product Type Octal D Type Flip Flop | ||
Logic Family HC | ||
Input Type Single Ended | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 2V | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Flip-Flop Type Type D | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Trigger Type Positive Edge | ||
Minimum Operating Temperature -40°C | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals JEDEC No. 7A | ||
Length 13mm | ||
Series 74HC | ||
Height 2.45mm | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Related links
- onsemi MM74HC74AM 2 Octal D Type Flip Flop HC 14-Pin SOIC
- onsemi 2 Octal D Type Flip Flop HC 14-Pin SOIC
- Texas Instruments Octal D Type Flip Flop LVC 20-Pin TSSOP (PW)
- Texas Instruments SN74LVC574APW Octal D Type Flip Flop LVC 20-Pin TSSOP (PW)
- Toshiba 8-Bit Octal D Type Latch D Type Flip-Flop, 20-Pin SOIC
- Toshiba 74HC573D 8-Bit Octal D Type Latch D Type Flip-Flop, 20-Pin SOIC
- Texas Instruments Octal D Type Flip Flop CMOS, 20-Pin PDIP (N)
- Texas Instruments TPIC6273DW Octal D Type Flip Flop CMOS, 20-Pin PDIP (N)