Microchip KSZ8567RTXI, Ethernet Switch IC MDI/MDIX, 1.8 V, 2.5 V, 3.3 V, 128-Pin TQFP
- RS Stock No.:
- 239-5579
- Mfr. Part No.:
- KSZ8567RTXI
- Manufacturer:
- Microchip
Subtotal (1 tray of 90 units)*
MYR5,545.44
FREE delivery for orders over RM 500.00
Temporarily out of stock
- Shipping from 20 January 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per Unit | Per Tray* |
|---|---|---|
| 90 + | MYR61.616 | MYR5,545.44 |
*price indicative
- RS Stock No.:
- 239-5579
- Mfr. Part No.:
- KSZ8567RTXI
- Manufacturer:
- Microchip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Physical Network Type | 10/100BASE-T PHY | |
| Network Interface | MDI/MDIX | |
| Communication Mode | Full Duplex/ Half Duplex | |
| Number of Transceivers | 5 | |
| Package Type | TQFP | |
| Pin Count | 128 | |
| Typical Operating Supply Voltage | 1.8 V, 2.5 V, 3.3 V | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Physical Network Type 10/100BASE-T PHY | ||
Network Interface MDI/MDIX | ||
Communication Mode Full Duplex/ Half Duplex | ||
Number of Transceivers 5 | ||
Package Type TQFP | ||
Pin Count 128 | ||
Typical Operating Supply Voltage 1.8 V, 2.5 V, 3.3 V | ||
The Microchip highly-integrated, IEEE 802.3 compliant networking device that incorporates a layer-2 managed high-performance Ethernet switch, five 10BASE-T/Te/100BASE-TX physical layer transceivers (PHYs) and associated MAC units, and two MAC ports with individually configurable RGMII/MII/RMII interfaces for direct connection to a host processor/controller, another Ethernet switch, or an Ethernet PHY transceiver. This device incorporates full hardware support for the IEEE 1588v2 precision time protocol (PTP), including hardware time-stamping at all PHY-MAC interfaces, and a high-resolution hardware “PTP clock”. IEEE 1588 provides sub microsecond synchronization for a range of industrial Ethernet applications.
Requires 2 to 3 power supply for 1.8 V, 2.5 V, or 3.3 V
Non-blocking wire-speed Ethernet switch fabric supports 1 Gbps on RGMII
Full-featured forwarding and filtering control, including port-based Access Control List filtering
Full VLAN and QoS support
Traffic prioritization with per-port ingress/egress queues and by traffic classification
Non-blocking wire-speed Ethernet switch fabric supports 1 Gbps on RGMII
Full-featured forwarding and filtering control, including port-based Access Control List filtering
Full VLAN and QoS support
Traffic prioritization with per-port ingress/egress queues and by traffic classification