Brad from Molex 13005 Series Female RJ45 Connector, Panel Mount, Cat5e

RS Stock No.:: 385-1356
Mfr. Part No.:: 1300515001
Manufacturer:: Brad from Molex

Brad from Molex 13005 Series Female RJ45 Connector, Panel Mount, Cat5e

Available for back order.

Price Each

MYR169.35

Units	Per Unit
1 - 14	MYR169.35
15 - 49	MYR165.79
50 +	MYR160.81

RS Stock No.:: 385-1356
Mfr. Part No.:: 1300515001
Manufacturer:: Brad from Molex

Panel Sockets

Sealed panel mounting shielded RJ45 sockets meet IP67 rating when mated with RJLnxx plugs and patch leads. All models are highly reliable and excellent quality.

Features & Benefits

The PCB version has solder pads for wire connection to the socket. Pads are clearly numbered against socket contacts

The through socket version has a fully shielded socket on the rear PCB. This allows immediate connection through an RJ45 plug. Ideal for greater serviceability and easy maintenance. Wired to 568B

The IDC version has colour coded terminal blocks allowing IDC terminations in seconds. Typical 110 punchdown hand tool stock no. 472-6740.

Direct PCB mount version, with front lock nut design is ideal for OEM applications where the receptacle is terminated directly onto a PCB. Which is then mounted into the device housing (overall depth 20.3 mm)

A fifth version has a 300 mm shielded cable and terminated RJ45 plug wired (568B) to the rear PCB. Facilitates rapid connection to internal sockets

A dust cap for unused sockets stock no 385-4197 is available separately. This gives an IP67 rating when fitted

Need a protection cap?
Check out: 385-4197

Other variants:
385-1356 & 446-3354 – RJ45, Direct PCB mount.
385-1362 – RJ45, With PCB and RJ45 port from the back.
385-1384 – RJ45 with mounted male RJ45 termination.
446-3360 – RJ45 with punch down receptacles (Punch down tool – 472-6740)

Brad from Molex Female Cat5e RJ45 Connector, Straight, 49.78mm Depth - ENSR1FB5

Enjoy speedy data transmission in your network and industrial equipment thanks to this Brad from Molex RJ45 (registered jack) connector. It's designed to mount directly onto your printed circuit board (PCB) to make a direct communication link. The unit's eight contacts are made of highly conductive copper alloy, so you can be sure of a reliable connection. Polycarbonate (PC) housing offers impact resistance and insulation to protect you from electrical hazards. You'll find this versatile component used in domestic, commercial and industrial environments.

• IP67 (ingress protection) rated (with protection cap) to withstand dust and immersion in up to 1m of water for 30 minutes
• Broad operating temperature range of -20° to +80°C for use in both hot and cold environments
• Light weight of 22.2g for easy handling
• Maximum current per contact of 1.5A for energy efficiency and low heat dissipation
• Transmission speed of 1000Mbps (megabits per second) for speedy data transfer

Applications

• Automotive industries
• Process and packaging equipment
• Factory automation

What's the voltage rating of this connector?

This connector has a voltage rating of 125V DC (direct current), which makes it a practical option for use in low-voltage applications.

BRAD Range

Fully sealed (rated IP67) RJ45 connectors for use in environmentally demanding applications
Overmoulded and bonded envelopes protect data transmission in harsh applications against water, oil and dust ingress both for internal and external use
Connectors perform to category 5e standards and are available in shielded versions particularly suitable in electrically noisy environments

Attribute	Value
Gender	Female
Ethernet Connector Type	RJ45 Connector
LAN Category	Cat5e
Number of Ports	1
Mounting Type	Panel Mount
Number of Ways	8
Shield Type	Shielded
Orientation	Straight
Depth	49.78mm
Series	13005
Series Number	130051