Recom RSO DC-DC Converter, 5V dc/ 200mA Output, 9 → 18 V dc Input, 1W, Through Hole, +85°C Max Temp -40°C Min

Wide 2:1 input voltage range
Regulated outputs
Medical safety approval EN 60601-1
1kV input / output isolation
Low noise
No external capacitor needed
Remote On/Off Control
Continuous short circuit protection
UL94V-0 package material
SIP-8 package

No de-rating over quoted operating temperature range.
MTBF to MIL-HDBK-217F (25°C).

Is your power supply running too high for your application? Bring it down a peg or two with this DC-DC converter from RECOM. The unit drops a nominal 12V to a regulated 5V, so that two circuits using different voltages can work together. An electrical barrier with an isolation voltage of 1kV DC keeps the input and output safely separated, protecting you from nasty shocks in case of an internal failure. The converter comes in a compact SIP8 industrial standard package (21.8 x 9.2 x 11.1mm). Use the through-hole mounts to fix it securely to your PCB, for a quick and easy setup.

• Low-noise device helps keep your equipment running without buzzing or humming
• Operating temperature range of -40°C to +85°C, so it's suitable for use in demanding environments
• Remote on/off control helps conserve power when not in use
• Continuous short-circuit protection to reduce the risk of damage from surges

• Telecommunications
• Medical equipment
• Industrial machinery
• Consumer electronics

At a lightweight 4.7g, this converter won't weigh down your setup.

The converter has a typical efficiency of 75%, so it's an energy-saving choice.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.