Weidmuller Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 1.7mm Pin Diameter, 1.5mm² Wire Size, Black

Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm² and crimp wire-end ferrules with the same cross section.
Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 and with DIN 6228. Automatic feeding of wire-end ferrules.
The wire-end ferrules are supplied in packs of 500 split into strips of 50 parts each (see stock numbers 204-6682, 204-6698, 204-6705, 204-6711 and 204-6727)
Stock number 204-6676 is a kit consisting of a carry case containing 1 x pliers, 250 x 1mm² wire-end ferrules and 250 x 1.5 mm² wire-end ferrules.
Stock number 286-1009 is a STRIPAX PLUS 2.5 crimp tool

Tame wild wire ends with these crimp bootlace ferrules from Weidmuller. Thanks to the compact collar diameter of just 3.2mm, it fits snugly around 16AWG-sized cables to make wiring and installation a walk in the park. PP insulation safeguards each unit to keep electrical signals under wraps and to fend off unexpected jolts during handling. This product comes in a box of 500, so you can tackle multiple jobs from the manufacturing floor to the field.

• Metal sleeve thickness of 0.15mm to support high-current applications
• Copper contact material is highly conductive and non-corrosive to maintain a stable signal

• Wiring systems
• Manufacturing industry
• Commercial properties
• Lighting networks

It's a breeze to bring together your wires with this ferrule. All you need to do is cap the cable with a ferrule and then use a crimp tool (286-1009) to seal the connection.

Crimping a wire with a ferrule stops the ends from fraying, giving you a long-lasting connection.