Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

Filters

Viewing 41 - 60 of 123 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 452-9634
Mfr. Part No.217.GJ1
BrandFacom
MYR678.71
1 Box of 1
Box(es)
60; 40; 100; 20; 20 mm Steel Tips: 10; 12; 14; 16; 18: Brass Tips: 12; 16; 20: Polyamide Tips: 12; 16; 20: Brass Tips For Extension: 12; 16; 18; Polyamide Tip For Extension: 12; 16; 18 mm 19 - Anti-Vibration
RS Stock No. 545-389
Mfr. Part No.E171RS
BrandEclipse
MYR128.11
Each
units
120 mm 4 mm 1 - Automatic
RS Stock No. 329-7780
Mfr. Part No.257.G
BrandFacom
MYR197.69
Each
units
- 16.0 mm 1 - Centre
RS Stock No. 494-086
Mfr. Part No.4-18-226
BrandStanley
MYR151.29
Each
units
152 mm 1.5 → 3 mm 6 - Pin
RS Stock No. 784-5945
Mfr. Part No.256.2.5
BrandFacom
MYR25.86
Each
units
100 mm 7 mm 1 - Centre
RS Stock No. 733-738
Mfr. Part No.351WRS
BrandEclipse
MYR119.93
1 Set
Set(s)
100 mm 1/4 → 1/8 in 4 - Centre
RS Stock No. 733-722
Mfr. Part No.E172RS
BrandEclipse
MYR340.25
Each
units
149 mm 6.2 mm 1 - Automatic
RS Stock No. 733-744
Mfr. Part No.351ARS
BrandEclipse
MYR31.88
Each
units
100 mm 3.2 mm 1 90° Fine Machine Point
RS Stock No. 737-2797
Mfr. Part No.70070003
BrandSTAHLWILLE
MYR50.96
Each
units
150 mm 4 mm 1 - Parallel Pin
RS Stock No. 220-0662
Mfr. Part No.249.GPB
BrandFacom
MYR260.89
1 Set
Set(s)
55 mm 3 → 8 mm 5 - Anti-Vibration
RS Stock No. 120-1147
Mfr. Part No.T3307P
BrandCK
MYR21.83
Each
units
100 mm 10 mm 1 12° Centre
RS Stock No. 784-5932
Mfr. Part No.249.GJ7
BrandFacom
MYR428.30
Each
units
140 mm, 150 mm, 190 mm, 200 mm, 210 mm, 216 mm, 230 mm 10 mm, 12 mm, 14 mm, 8 mm 7 - Anti-Vibration
RS Stock No. 794-7713
Mfr. Part No.249.G2
BrandFacom
MYR49.23
Each
units
- 2 mm 1 - Drift
RS Stock No. 125-3901
Mfr. Part No.316D
BrandGedore
MYR142.50
Each
units
- 3 → 10 mm 6 - Parallel Pin
RS Stock No. 125-2165
Mfr. Part No.0-69-014
BrandStanley
MYR26.68
Each
units
- 3.2 mm 1 - Pin
RS Stock No. 737-2793
Mfr. Part No.70070002
BrandSTAHLWILLE
MYR51.83
Each
units
150 mm 3 mm 1 - Parallel Pin
RS Stock No. 772-4400
Mfr. Part No.106 D
BrandGedore
MYR294.43
Each
units
150 mm 10 mm 6 - Pin
RS Stock No. 794-7858
Mfr. Part No.251A.1
BrandFacom
MYR51.22
Each
units
- 0.9 mm 1 - Drift
RS Stock No. 510-153
Mfr. Part No.DX620
BrandStarrett
MYR177.30
Each
units
89 mm 1/8 → 3/8 in 5 - Pin
RS Stock No. 530-722
Mfr. Part No.MODM.CG
BrandFacom
MYR591.28
Each
units
- Drift Punches: 2; 3; 4; 5; 6; 8; Nail Punches: 4; 5; 6; 8 mm 11 - Pin
Related Products
For punching holes in thin sheet steel, aluminium ...
Description:
For punching holes in thin sheet steel, aluminium and brass up to 14 gauge (1.5mm)Tool develops up to 1 ton force7 punches from 3/32 " to 9/32 " in 1/32 stepsSupplied with die key & storage caseThroat depth of 1 ...
Introducing the high-quality set of 12 chisels and ...
Description:
Introducing the high-quality set of 12 chisels and punches from Stanley. These professional standard hand tools have been made from tempered chrome-vanadium steel and have been forged to increase performance, durability and strength. This kit provides an excellent choice of ...
Gedore 316D pin punch set, excellent quality hot ...
Description:
Gedore 316D pin punch set, excellent quality hot forged, hardened and tempered. Six piece pin punch set supplied in metal case for easy storage. Six piece Pin Punch SetDIN 6450In metal case with lidHot forgedHardened and temperedStriking head, blue varnish ...
The Teng Tools PPS06 series is a 6 ...
Description:
The Teng Tools PPS06 series is a 6 piece parallel pin punch set. It has special tempered steel construction with hardened point for longer life. Overall length 150mm with hexagon grip and rounded shaft areaSupplied with a handy storage holder. ...