Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

Filters

Viewing 21 - 40 of 123 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 701-0562
BrandRS PRO
MYR195.37
1 Set
Set(s)
120 mm 10 mm 5 - Drift
RS Stock No. 668-5755
BrandRS PRO
MYR40.94
Each
units
185 mm 2.5 mm 1 - Centre
RS Stock No. 290-5109
BrandRS PRO
MYR121.83
Each
units
139 mm 3 mm 1 20° Automatic
RS Stock No. 423-2627
BrandRS PRO
MYR63.83
1 Set
Set(s)
4 in - 3 - Centre
RS Stock No. 460-9550
BrandRS PRO
MYR164.80
Each
units
130 mm 17 mm 1 - Automatic
RS Stock No. 484-748
BrandRS PRO
MYR229.06
1 Set
Set(s)
150 mm - 5 - Parallel Pin
RS Stock No. 875-4758
BrandRS PRO
MYR72.74
Each
units
- - 3 - Centre
RS Stock No. 182-9787
BrandRS PRO
MYR22.30
Each
units
- 4.0 mm 1 - Centre
RS Stock No. 456-3640
BrandRS PRO
MYR140.47
Each
units
150 mm 3 → 10 mm 6 - Parallel Pin
RS Stock No. 182-9792
BrandRS PRO
MYR26.41
Each
units
- 6.0 mm 1 - Parallel Pin
RS Stock No. 521-5364
BrandRS PRO
MYR29.24
Each
units
35 mm 3.5 mm 1 - Replaceable
RS Stock No. 875-4761
BrandRS PRO
MYR125.51
Each
units
- 3 → 9.5 mm 5 - Parallel Pin
RS Stock No. 473-0705
BrandRS PRO
MYR8.37
Each
units
120 mm 10 mm 1 - Centre
RS Stock No. 182-9788
BrandRS PRO
MYR26.48
Each
units
- 3.0 mm 1 - Parallel Pin
RS Stock No. 182-9790
BrandRS PRO
MYR26.48
Each
units
- 4.0 mm 1 - Parallel Pin
RS Stock No. 182-9791
BrandRS PRO
MYR26.41
Each
units
- 5.0 mm 1 - Parallel Pin
RS Stock No. 494-076
Mfr. Part No.4-18-299
BrandStanley
MYR211.52
Each
units
Starter Punch: 140; Centre Punch: 101; 114; Pin Punch: 152; Cold Chisel: 141; 152; 171 mm 1.5 → 6 mm 12 - Pin
RS Stock No. 282-782
Mfr. Part No.J2
MYR477.59
Each
units
4 4/8 → 6 in 1/4 → 7/16 in 12 - Pin
RS Stock No. 282-805
Mfr. Part No.J46
MYR1,324.32
Each
units
4 3/4 → 10 in 3/16 → 7/8 in 26 - Pin
RS Stock No. 452-9634
Mfr. Part No.217.GJ1
BrandFacom
MYR678.71
1 Box of 1
Box(es)
60; 40; 100; 20; 20 mm Steel Tips: 10; 12; 14; 16; 18: Brass Tips: 12; 16; 20: Polyamide Tips: 12; 16; 20: Brass Tips For Extension: 12; 16; 18; Polyamide Tip For Extension: 12; 16; 18 mm 19 - Anti-Vibration
Related Products
For punching holes in thin sheet steel, aluminium ...
Description:
For punching holes in thin sheet steel, aluminium and brass up to 14 gauge (1.5mm)Tool develops up to 1 ton force7 punches from 3/32 " to 9/32 " in 1/32 stepsSupplied with die key & storage caseThroat depth of 1 ...
Introducing the high-quality set of 12 chisels and ...
Description:
Introducing the high-quality set of 12 chisels and punches from Stanley. These professional standard hand tools have been made from tempered chrome-vanadium steel and have been forged to increase performance, durability and strength. This kit provides an excellent choice of ...
Gedore 316D pin punch set, excellent quality hot ...
Description:
Gedore 316D pin punch set, excellent quality hot forged, hardened and tempered. Six piece pin punch set supplied in metal case for easy storage. Six piece Pin Punch SetDIN 6450In metal case with lidHot forgedHardened and temperedStriking head, blue varnish ...
The Teng Tools PPS06 series is a 6 ...
Description:
The Teng Tools PPS06 series is a 6 piece parallel pin punch set. It has special tempered steel construction with hardened point for longer life. Overall length 150mm with hexagon grip and rounded shaft areaSupplied with a handy storage holder. ...