Battery Holders

What is it?
A battery holder is a cavity or compartment used to house one or more batteries in a piece of equipment safely. The battery holder has flat metal or spring coiled contacts that press against the battery terminals making an electrical contact.
What does it do?
A battery holder provides a convenient method of containing the cells neatly in a casing. The holder or mount is moulded into the shape of the battery it houses.
Types
Battery holders are available in various shapes, styles and materials. The main ones are:
Chassis mount
Chassis mount battery holders can be made of metal or plastic. They are fixed to a panel, chassis or plate via fixing holes in the back of the casing base or by tabs at the side. The holders can be open faced or enclosed. Chassis mount holders and mounts accept AA, AAA, C, D AA and 9 V PP3 cell sizes.
Panel mount
Panel mount battery holders are made of plastic. They are designed to slot into a pre-prepared hole in a panel. There are two main fixing methods,
• Flange panel fixing
Secured to the panel via a flange with pre-drilled holes. These holders are draw style holders with a flip front or pull out draw compartment. They hold single larger cells like 9 V PP3 or multiple 2, 3 and 4 cylindrical AAA, AA, C and D cells.
• Screw fixing
Secured to the panel with screw thread gasket and nut. These holders are long cylindrical holders with a cap. The cap can be finger operated or slotted cap (for screwdriver release).
PCB Mount
PCB mount battery holders can be made of metal or plastic. They are designed to mount directly on to a printed circuit board. The holders have sharp pins protruding from the base of the holder. Pins are pushed through the holes on a PCB board and soldered. These battery mounts are usually open faced. PCB holders can hold single coin cells or multiple 2, 3 and 4 cylindrical AAA, AA, C, D cells
Strap and lead
Strap and lead types are a battery connector rather than a holder or mount. They are two press studs fixed into a plastic flat base. The base has two short lengths of flexible wire with tinned ends for connection. Strap and lead styles are used with 9 V PP3 cells.

...
Read more Read less

Filters

Viewing 1 - 20 of 359 products
Results per page
Description Price For Battery Size Number of Cells Mount Type Maximum Cell Diameter Dimensions Terminal Contact Type Body Material Terminal Contact Material
RS Stock No. 512-3580
BrandRS PRO
MYR4.58
Each
units
AA 2 Chassis Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PE -
RS Stock No. 512-3552
BrandRS PRO
MYR4.94
Each
units
AAA 2 Chassis Battery Holder - 52.3 x 24.7 x 13mm Coil Spring PP -
RS Stock No. 594-628
BrandRS PRO
MYR5.12
Each
units
AA 4 Chassis Battery Holder - 57 x 30 x 30mm Coil Spring PP -
RS Stock No. 611-9605
BrandRS PRO
MYR3.03
Each
units
AA 4 PCB Battery Holder - 58 x 31 x 28mm Coil Spring PP Nickel Plated Steel
RS Stock No. 594-432
BrandRS PRO
MYR5.30
Each
units
AA 4 Chassis Battery Holder - 115 x 27 x 17mm Coil Spring PP Nickel Plated Steel
RS Stock No. 594-612
BrandRS PRO
MYR10.35
Each
units
C 4 Chassis Battery Holder - 108 x 54 x 24mm Coil Spring PP -
RS Stock No. 594-426
BrandRS PRO
MYR29.93
Each
units
D 4 Chassis Battery Holder - 149 x 71 x 28mm Coil Spring PP Nickel Plated Steel
RS Stock No. 611-9598
BrandRS PRO
MYR2.58
Each
units
AA 2 PCB Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PP Nickel Plated Steel
RS Stock No. 512-3574
BrandRS PRO
MYR4.58
Each
units
AA 1 Chassis Battery Holder - 57.2 x 16.4 x 15mm Coil Spring PP -
New
RS Stock No. 185-4718
BrandRS PRO
MYR4.43
Each
units
- - - Battery Holder - 19.45 x 14.6 x 4.2mm - PPS -
New
RS Stock No. 185-4732
BrandRS PRO
MYR10.40
Each
units
9V - Snap-In Battery Holder - 53.4 x 57.6 x 29mm - - -
New
RS Stock No. 185-4723
BrandRS PRO
MYR5.46
Each
units
CR2032 - - Battery Holder - 26 x 7.1mm - - -
New
RS Stock No. 185-4712
BrandRS PRO
MYR3.91
Each
units
CR2032 - - Battery Holder - 27.8 x 22.8mm - PBT -
New
RS Stock No. 185-4783
BrandRS PRO
MYR5.15
Each
units
CR2032 - - Battery Holder - 28.5 x 16.1 x 5.4mm - PBT -
New
RS Stock No. 185-4752
BrandRS PRO
MYR3.40
Each
units
N 1 - Battery Holder - 34.6 x 13.2 x 12.5mm Solder Tag - -
New
RS Stock No. 185-4745
BrandRS PRO
MYR13.29
Each
units
AA 6 Wire Lead Battery Holder - 65.8 x 114 x 18.7mm - - -
New
RS Stock No. 185-4719
BrandRS PRO
MYR4.53
Each
units
CR2032 - - Battery Holder - 31.9 x 16 x 5.75mm - - -
New
RS Stock No. 185-4699
BrandRS PRO
MYR7.62
Each
units
D 2 Snap-In Battery Holder - 71.2 x 73.2 x 31.2mm - - -
New
RS Stock No. 185-4637
BrandRS PRO
MYR6.18
Each
units
AA 6 Wire Lead Battery Holder - 58 x 45 x 28mm - - -
New
RS Stock No. 185-4677
BrandRS PRO
MYR4.84
Each
units
C 1 - Battery Holder - 62 x 30 x 24.5mm Solder Tag - -