Eaton 32A British Standard Fuse, A2, 660V ac, 73mm

As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A

Breaking capacity 80kA ac 40kAdc
Rated up to 550Vac/ 250Vdc (Type A1) & 660Vac/ 460Vdc (Type A2)
General purpose (gG) and dual motor rated (gM) types
Low power dissipation
660Vac rated (A1 types 415Vac)
ASTA 20 certified

As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A.

By acting as a weak link, this British Standard fuse from Eaton breaks an electrical circuit when a dangerous overcurrent occurs. This reduces the risk of damage to electrical components. It can accommodate short surges caused by motor start-ups and only blows when sustained overloads and short circuits occur. As it's a high-rupturing capacity (HRC) fuse, it responds to both high-current and low-current faults for improved protection of equipment. It features low-power dissipation, so minimises energy wastage. A versatile fuse like this is well-suited for safeguarding a wide variety of motor-propelled equipment, such as turbines, engines and transformers.

• Tagged fuse that's easy to mount and replace if it blows
• Improves safety by reducing the risk of fire and electrical shock
• Resistant to ageing so needs minimal maintenance

No, this cylindrical-shaped fuse is designed to produce no sparks, gas or electrical discharge when its resistor melts.

A fuse with a high breaking capacity like this one is useful as a complementary protection device in a low-voltage system. You can use it as a back-up to a circuit breaker.

Eaton formerly known as Bussmann