Eaton 32A British Standard Fuse, A2, 550V ac, 73mm

Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

• The low-temperature rise enables the fuse to be suitable for high-density mounting
• Fuse links, specifically designed for the protection of equipment
• Conforms to industry standards
• Low voltage fuse
• High rupture capacity (HRC)
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS 88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

• Features a 32 A current rating
• Holds a 550 V ac voltage rating
• Sits within the GG application category
• Dimensions are: L85mm x D13.7 mm x H35.5mm
• A2 fuse size

• Overall length of 85mm to fit into compact circuit designs
• Bolted offset tags for easy attachment to fuse holders
• Designed for type-2 coordinated applications to save downtime and improve safety
• Low resistance for higher sensitivity to current and voltage changes

No, once an irregularity in voltage or current flow causes a fuse element to break, the whole fuse needs to be replaced immediately to keep your equipment safe to use and protected from damage.

Eaton formerly known as Bussmann