10-27559, Single-Sided Stripboard Epoxy Glass 233.4 x 160 x 1.6mm DIN 41612 FR4

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Single-Sided Stripboard

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Specifications
Attribute Value
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Dimensions 233.4 x 160 x 1.6mm
Hole Diameter 1mm
Hole Pitch 2.54 x 2.54mm
Connection DIN 41612
FR Material Grade FR4
Length 233.4mm
Thickness 1.6mm
Width 160mm
2 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR366.06
MYR 362.26
units
Per unit
1 - 9
MYR362.26
10 - 19
MYR357.18
20 - 49
MYR351.13
50 +
MYR338.96
Related Products
The RE434-LF is a two-sided SMD Breadboard used ...
Description:
The RE434-LF is a two-sided SMD Breadboard used for a wide range of educational and hobbyist applications. The breadboard has been designed in an epoxy glass hard fabric and is 53mm x 95mm in dimension. Epoxy fibre-glass FR4 0.80 mmDouble-sided ...
Epoxy glass laminate with extremely high mechanical and ...
Description:
Epoxy glass laminate with extremely high mechanical and electrical strength. Good dielectric properties under dry and humid conditions Excellent rigidity and dimensional stabilityConforms to EN60893 type RP GC 201.
HF Verocard for circuits with a critical assembly.Component ...
Description:
HF Verocard for circuits with a critical assembly.Component side fully laminated with etched holes. Maximum isolation through grounding of the lamination. For reliable HF, digital and analogue circuits34 parallel circuit tracks, each with 540 holesNumerical gridDIN 41612 connector receptacle.
The RE520 is a brilliant copper stripboard will ...
Description:
The RE520 is a brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry. It features pierced copper tracks and a base material of SRBP. Stripboards also give you brilliant access to solder your ...