RS PRO Analogue → Analogue Isolating Signal Converter, Analogue 0 → 20 mA, -250 → +250 V dc Input

  • RS Stock No. 218-4469
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

24Vdc Trip Amplifiers, Signal Isolator/Converters

Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation

Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation
Dual supply voltage operation
LED indication of "power on"

Technical specification - Signal Conditioning Units
Relay Contact Rating 3A @ 250Vac (cosØ = 1)
1A @ 250Vac (cosØ = 1)
Trip Differential 0.5% of span
Specifications
Attribute Value
Input Type Analogue
Output Type Analogue
Signal Conditioner Type Analogue → Analogue
Input Range -250 → +250 V dc, 0 → 20 mA
Output Range 0 → 10 mA, 0 → 10 V dc
Supply Voltage 10 → 30 V dc
Mounting Type DIN Rail
Sensor Compatibility RTD, Thermocouple
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
Operating Temperature Range 0 → +50 °C
Termination Screw
Module Type Converter
12 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 1,024.01
units
Per unit
1 +
MYR1,024.01
Related Products
MurrElektronik MUW 6.2 series analog converters convert standard ...
Description:
MurrElektronik MUW 6.2 series analog converters convert standard signal formats galvanically separated into a 4 mA to 20 mA signal. An integrated current limiter ensures the output is short-circuit and overload protected. Status LED Input and output galvanically separated Screw ...
This compact signal converter with pulse inputs for ...
Description:
This compact signal converter with pulse inputs for two incremental encoders or measuring systems allows converting a frequency as well as sum, a difference, a product or a ratio between two frequencies into an analog signal. The integrated RS232 interface ...
The PSM-EG- switchgear modules are designed for industrial ...
Description:
The PSM-EG- switchgear modules are designed for industrial use and offer the following features:. Bi-directional conversion from RS-232 (V.24) to RS-232 (v.24), RS-422 (V11) and RS-485High quality galvanic isolation with 2.5kV test voltagePower supply voltage 24Vdc ±20%Alternative data line connection ...
Input options, 0-24VDC, 0-30VDCOutput options, 0-20mA, 4-20mA, 0-10V, ...
Description:
Input options, 0-24VDC, 0-30VDCOutput options, 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5VConfigured using dip switches3-way isolated24 VDC powered on module or via DIN rail bus connector6.2mm wideScrew terminals.