Parallax Inc 28108

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Line-follow kit for Boe-Bot mobile robot

This kit uses QTI infrared emitter/receiver modules to enhance the line-following capability of your Boe-Bot robot. Mount three or four sensors underneath the Boe-Bot chasis, and adjust the position to detect lines of different widths. Learning to use the QTI is easy with the illustrated instructions and example BASIC Stamp code provided.

Designed for close proximity infrared detection
Use as a digital sensor array to detect black lines in order to follow electrical tape courses or navigate mazes
Use as an analogue sensor to detect shades of grey

Note

The Boe-Bot robot is NOT supplied as part of the kit but is available seperately: 781-0924

A BASIC Stamp is a single-board computer that runs the Parallax PBASIC language interpreter in its microcontroller. The developer's code is stored in an EEPROM, which can also be used for data storage. The PBASIC language has easy-to-use commands for basic I/O, like turning devices on or off, interfacing with sensors, etc. More advanced commands let the BASIC Stamp module interface with other integrated circuits, communicate with each other, and operate in networks. The BASIC Stamp microcontroller has prospered in hobby, lower-volume engineering projects and education due to ease of use and a wide support base of free application resources.

3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 151.04
units
Per unit
1 - 9
MYR151.04
10 - 49
MYR143.50
50 +
MYR136.28
Related Products
iButton touch device probe for panel mounting applications, ...
Description:
iButton touch device probe for panel mounting applications, pre-wired for easy installation. • Simple, low-cost metal stampings form a read/write probe for the iButton family• Probe guides the entry of the iButton • iButton slides over the surface to self-clean ...
This antenna kit is designed for use with:FiPy ...
Description:
This antenna kit is designed for use with:FiPy - 5 network IoT development board (RS 136-8855)LoPy - LoRa, WiFi, BLE development board (RS 125-9532)SiPy - SigFox, WiFi, BLE development board (RS 125-9533 and RS 125-9540).The kit includes:- RF Cable Assemblies ...
The JTAG-SMT2 surface-mount programming module allows high-speed programming ...
Description:
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a ...
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, ...
Description:
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires. The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals ...