SKF Metal-Cased with Sealant Coated Rotary Shaft Seal, 41.275 mm ID, 53.975 mm OD
- RS Stock No.:
- 587-492
- Mfr. Part No.:
- 16054
- Manufacturer:
- SKF
Subtotal (1 pack of 5 units)*
MYR224.34
Stock information currently inaccessible - Please check back later
Pack(s) | Per Pack | Per Unit* |
|---|---|---|
| 1 + | MYR224.34 | MYR44.868 |
*price indicative
- RS Stock No.:
- 587-492
- Mfr. Part No.:
- 16054
- Manufacturer:
- SKF
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SKF | |
| Product Type | Rotary Shaft Seal | |
| Material | Metal-Cased with Sealant Coated | |
| Inside Diameter | 41.275 mm | |
| Outside Diameter | 53.975 mm | |
| Minimum Operating Temperature | -40°C | |
| Thickness | 6.35mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | No | |
| Select all | ||
|---|---|---|
Brand SKF | ||
Product Type Rotary Shaft Seal | ||
Material Metal-Cased with Sealant Coated | ||
Inside Diameter 41.275 mm | ||
Outside Diameter 53.975 mm | ||
Minimum Operating Temperature -40°C | ||
Thickness 6.35mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- MX
The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. Seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point