Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SMC
	Product Type	Pneumatic Logic Controller
	Number of Inputs	4
	Series	EX250
	Voltage	24V
	Display Type	LED
	Hazardous Area Certification	NO
	Number of Outputs	2
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	+50°C
	Width	21mm
	Standards/Approvals	UL (CSA), CE, RoHS
	Height	72.6mm
	Output Type	PNP/NPN
	Connection Type	M12
	Suitable Medias	Air

	Select all
	Brand SMC
	Product Type Pneumatic Logic Controller
	Number of Inputs 4
	Series EX250
	Voltage 24V
	Display Type LED
	Hazardous Area Certification NO
	Number of Outputs 2
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature +50°C
	Width 21mm
	Standards/Approvals UL (CSA), CE, RoHS
	Height 72.6mm
	Output Type PNP/NPN
	Connection Type M12
	Suitable Medias Air

COO (Country of Origin):: JP

SMC EX250 Series Pneumatic Logic Controller, 24V Voltage, 4 Inputs - EX250-IE2

This pneumatic logic controller provides Compact local control for Air systems, designed to Interface with sensors and valves in industrial automation environments. It operates on a 24V supply and supports four inputs with two switchable PNP/NPN outputs, using M12 connections and an LED display for status indication. Built for operation between −10°C and +50°C, it is intended for integration where space is limited and straightforward pneumatic logic is required.

Features & Benefits

• 24V supply enabling direct integration with common control circuits
• 4 inputs allowing multi-sensor logical decisions
• 2 outputs with PNP/NPN selection for flexible actuator drive
• M12 connectors for robust field wiring connections
• LED display giving immediate operational status feedback
• Wide operating temperature range supporting varied plant conditions

Applications

• Suitable for decentralised valve control on machine manifolds
• Ideal for switching pneumatic actuators from sensor logic
• used with M12 sensor networks in factory automation
• Suitable for small-scale pneumatic sequencing tasks
• Used for local interlocks and safety-related valve enable signals

What connector types are provided for field devices?

The unit uses M12 connection(s) for input and output device wiring to simplify installation with compatible sensors and actuators.

How are output polarities handled for different loads?

Outputs can be set to either PNP or NPN mode to match the input/output commoning convention of connected equipment.

What environmental range can the unit withstand during operation?

It is rated to operate from −10°C up to +50°C and is specified for typical industrial humidity without condensation.

How does the display assist during commissioning?

The LED display indicates status and helps verify signal presence and Basic fault conditions during set-up and fault-finding.

Can this controller be used directly with solenoid valves?

Yes, the outputs are suitable for driving valve control circuits at 24V provided the load and wiring conform to the unit’s output capabilities.

SMC EX250 series Pneumatic Logic Controller

FREE delivery for orders over RM 500.00