3 Pole DIN Rail Non Fused Isolator Switch, 25 A, 7.5 kW, IP65

  • RS Stock No. 805-5584
  • Mfr. Part No. 172834 & P1-25/XM
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators

The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

• Preforms local isolation, manual override & safety switch functions

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Eaton P1-25/XM

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained.

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• 3 pole
• Auxiliary contact or neutral conductor must be fitted by the user
• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Rear mounting
• Features an ambient operating temperature of -25 to +50 °C
• Has a mechanical shock resistance of 15 g
• M4 screw terminal
• Rear mounting

Attribute Value
Number of Poles 3
Maximum Current 25 A
Mounting Type DIN Rail
Power Rating 7.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 25 A
Length 49mm
Width 70mm
Depth 75mm
Throw Configuration Single
Terminal Type Screw
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
75 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 136.08
Per unit
1 +
Related Products
The new 5TL1 On/Off switches are used for ...
The new 5TL1 On/Off switches are used for the switching of lighting, motors and other electrical devices. Rated currents range between 32 A and 125 A. The new design of the 5TL1 On/Off switches allows them to be optically perfectly ...
Forming part of Schneider Electrics Vario Switch range ...
Forming part of Schneider Electrics Vario Switch range is this selection of isolator switches which are sometimes referred to as switch disconnectors. Comprised of a strong and durable material that is suitable for a multitude of environments, these three-pole versions ...
High impact grey polycarbonate enclosure, UV stabilised to ...
High impact grey polycarbonate enclosure, UV stabilised to IP66/67Low profile red/yellow operating handle integral with enclosure coverLockable with up to three padlocks in the OFF position; lid interlocked in the ON positionEarth terminal includedNominal switching voltage 690 V.
All have a nominal voltage of 690V. The ...
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Black/silver operating handleHandle padlockable (x4) in "OFF" positionAdjustable metal operating shaftDoor interlocked to prevent opening of panel door while switch ...