3 Pole Panel Mount Non Fused Isolator Switch, 40 A, 18.5 kW, IP20, IP65

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CZ
Product Details

Front/Door Mounting Switch Disconnectors

Forming part of Schneider Electrics Vario Switch range is this selection of isolator switches which are sometimes referred to as switch disconnectors. Comprised of a strong and durable material that is suitable for a multitude of environments, these three-pole versions are perfectly suited for manual motor control applications. Super easy to connect and wire as it comes to you undrilled, which enables variable cable entry positions.

Adaptable with simple attachment of auxiliary contact, neutral pole, or up to 3 main poles to basic 3-pole switch
Suitable for main/emergency switching
690V nominal voltage
Ingress protection IP55
Full compliance with BS/EN 60947-3
Supplied as complete kit in one pack

Features & Benefits

• Performs local isolation, manual override & safety switch functions
• For use in applications where there is a need to disconnect electrical equipment from the circuit, most commonly needed for repair and maintenance of electrical equipment
• These disconnect switches can also be used as safety switches
• Created and designed to safely isolate a circuit whilst it is being used or maintained

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

How does an isolator switch work?

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Note

The figures quoted for rated operational power within the price table are with respect to a voltage of 230/240V, with figures within brackets ( ) being those with respect to a voltage of 690V.
The higher current rating refers to use in free air, the lower current rating represents use in an enclosure.

Approvals

UL, CSA, GL

//media.rs-online.com/t_line/L433981-01.gif
//media.rs-online.com/t_line/LI257352-01.gif

Schneider Electric Vario Range

Specifications
Attribute Value
Number of Poles 3
Range TeSys
Maximum Current 40 A
Series VARIO
Mounting Type Panel Mount
Power Rating 18.5 kW
IP Rating IP20, IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Electrical Phase 3
Switch Rating 8 kV
Handle Colour Black
Maximum Operating Temperature +50°C
Terminal Type Screw
Minimum Operating Temperature -20°C
Temporarily out of stock - back order for despatch 09/10/2020, delivery within 4 working days from despatch date
Price Each
MYR 280.15
units
Per unit
1 +
MYR280.15
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one packageVisual indication of breaker state via the unique, single shot moulded, two colour actuator ...
Can be used on systems up to 550 ...
Description:
Can be used on systems up to 550 VacManufactured from rust protected sheet steelDoor may be removed for ease of installationSwitch can be locked on or off by means of a padlockRed and green switch position indicators.
High impact polycarbonate enclosures to IP65Lockable with up ...
Description:
High impact polycarbonate enclosures to IP65Lockable with up to four padlocks in the OFF positionVersions available with N/O early break auxiliary contactsEarth terminal provided, neutral terminal not includedAux. contact not feasible in 3 pole units160A unit fitted with terminal lugs ...
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...