3 Pole Panel Mount Non Fused Isolator Switch, NO, 100 A, 50 kW, IP65

  • RS Stock No. 818-457
  • Mfr. Part No. P3-100/EA/SVB
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Panel Door Mounted Switch Disconnector

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

Padlockable in OFF position, up to 3 padlocks and non-locking versions
Ingress protection to IP65
2 and 3 pole versions have built in neutral and earth connections
3 pole switches ('P' type only) accept add-on switched neutral and auxiliary contacts (except 20A switches) – see accessories (RS 219-1439 typical)
Rated operating voltage: 690 Vac
Switching power quoted for 380 - 440 Vac

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Standards

IEC (EN60) 947, IEC (EN60) 204

Approvals

UL, CSA

Specifications
Attribute Value
Number of Poles 3
Maximum Current 100 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 50 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 2000 A
Length 65mm
Width 65mm
Depth 59mm
Minimum Operating Temperature -25°C
Throw Configuration Single
Handle Colour Red
Maximum Operating Temperature +50°C
Terminal Type Screw
19 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 551.51
units
Per unit
1 +
MYR551.51
Related Products
An range of rear mounting switch disconnectors from ...
Description:
An range of rear mounting switch disconnectors from Eaton Moeller. On these switches the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and ...
Professional range of Eaton flush or surface mounted ...
Description:
Professional range of Eaton flush or surface mounted changeover switches. All the changeover switches are IP65 rated and have red rotary handle. All the switches are lockable in the OFF position. IP65 RatedFlush or Surface MounitingRed rotary handleLockable in the ...
The P1 series of switch-disconnectors are compact and ...
Description:
The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where ...
All have a nominal voltage of 690V. The ...
Description:
All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" positionFingerproof main terminals on 20A to 63A switchesTerminal shrouds supplied with 80A to 250A switches.