Entrelec, SNA Series , 380 V ac Multi Level Terminal Block, Screw Termination

  • RS Stock No. 454-693
  • Mfr. Part No. 1SNA115541R1100
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Triple Deck and Sensor

For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both PNP and NPN sensors. Cable size and current rating is 2.5mm² and 26 A for all types, with a mounting pitch of 6mm. Suitable for mounting on symmetric rail only (BS5584:1978),Sub-type A : 3 level feedthrough - use where space saving is a requisite.,Sub-type B : 2 single contacts and a feedthrough, ideally suited for power distribution across a number of sensors using jumper bars, enabling the top feedthrough connection to be used for the signal lead.Sub-type C : a three tier sensor terminal with red indication LED. Using the lower two terminations for power distribution, the upper feedthrough being used for the signal lead connection. The LED indicating sensor output suited to 24Vdc PNP output sensors.Sub-type D : a three tier terminal, similar to the type 3, but suited to a 24Vdc NPN output sensor.Sub-type E : a feedthrough terminal block with a green LED indicator to signify power on status. Suited to indicate signal/power conditions on PLCs. 24Vdc on LED circuit.

Note

Not all types may be available

//media.rs-online.com/t_line/L454693-05.gif
//media.rs-online.com/t_line/LE454693-02.gif

Approvals

7777

Specifications
Attribute Value
Series SNA
Cable CSA 2.5mm²
Colour Grey
Current Rating 22A
Number of Levels Triple
Termination Method Screw
Voltage Rating 380 V ac
Pitch 6mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
750 In Global stock for delivery within 4 - 6 working days
Price Each (In a Pack of 5)
MYR 27.658
units
Per unit
Per Pack*
5 +
MYR27.658
MYR138.29
*price indicative
Related Products
Professional range of Entrelec Standard DIN rail terminals. ...
Description:
Professional range of Entrelec Standard DIN rail terminals. Three different functions are availalble. They are either Screw, Spring or Stud making these DIN rail terminals perfect for standard industrial applications. Screw, Spring or Stud functions.
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Provides 3 circuits within the same terminal width ...
Description:
Provides 3 circuits within the same terminal width and a clamp electrically grounded to the mounting railIdeal for use in the supply of 3 -phase motors with protectionBlocks are closed therefore do not require end section Comb facility eases wiring ...
Double deck terminals with interconnection via 'pre-assembled' jumper ...
Description:
Double deck terminals with interconnection via 'pre-assembled' jumper bar. • Two versions available: one with vertical interconnection and partition on the lower deck, one version with just partition• Flexibility to snap onto symmetrical and asymmetrical DIN Rails.