Entrelec, SNA Series , 1 kV ac Standard Din Rail Terminal, Stud Termination

  • RS Stock No. 424-226
  • Mfr. Part No. 1SNA115140R2300
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

High Current Double Stud Terminals and Shrouds

A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the spacers and can span 3 adjacent terminals is also available as a set.

2 shunt-connect studs and 4 terminals up to 300mm2
Ideal for power cable termination
EExe and EExi certification for use in hazardous areas

Approvals

1-3, 8 & 9

Specifications
Attribute Value
Series SNA
Cable CSA 25mm²
Colour Grey
Current Rating 101A
Number of Levels Single
Termination Method Stud
Voltage Rating 1 kV ac
Pitch 26mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
54 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 35.22
units
Per unit
1 +
MYR35.22
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
For circuit isolation during start up and for ...
Description:
For circuit isolation during start up and for periodic test, measurement and calibrationOperated by turning knob 1/4 turn with screwdriverEquipped with 2 test sockets, 4mm dia.
Screw's self-retention function prevents short circuiting through fallingDenatured ...
Description:
Screw's self-retention function prevents short circuiting through fallingDenatured PPO used in insulation materialsAdapted rail; DAV4-1000 is 35 mm in width, conforming to DIN standardJust push from top to mount on railMounting bracket (2x required); HDV-1Name plate; AM-10.
ABB series of double deck DIN Rail terminals ...
Description:
ABB series of double deck DIN Rail terminals with four independent screw clamp connections and are suitable for use with a wide range of cable size. • Space saving• Feed-through connection• Flexibility to snap onto symmetrical and asymmetrical DIN Rails. ...