Fluke I1010 Multimeter Current Clamp Adapter, 1000A, 600A ac, 30mm

  • RS Stock No. 237-4224
  • Mfr. Part No. 1640971
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TH
Product Details

Fluke Current Probes

Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.

Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V

Supplied With: 9V PP3 alkaline battery and operators manual.

Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 1000A
Maximum AC Current 600A ac
Best Accuracy ±2% + 0.5 A
Maximum Conductor Size 30mm
Safety Category CAT III 600 V
Output Type Voltage
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 60 h
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600V
Safety Category Level CAT III
Model Number p I1010
10 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 2,620.00
units
Per unit
1 +
MYR2,620.00
Related Products
FLIR TA72 Universal Flex Current Probe features a ...
Description:
FLIR TA72 Universal Flex Current Probe features a 10inch long narrow flexible coil clamp and locking mechanism. which lets you easily take measurements in tight or awkward spots. The TA72 can measure up to 3000A AC. It is portable and ...
These compact, lightweight and ergonomic sensors of varying ...
Description:
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ...
The FLIR TA74 adds capabilities, simplifies challenges, and ...
Description:
The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple ...
The PAC Series is a range of Hall-effect ...
Description:
The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 30 mm or 2x24 mm in diameter, as well as small busbars. The range comprises ...