Fluke I800 Multimeter Current Clamp Adapter AC, 800A ac, 54mm

  • RS Stock No. 401-416
  • Mfr. Part No. FLUKE I800
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

i800 a.c. Current Clamp Probe

The Fluke i800 a.c. Current Clamp Probe is designed to extend the current measuring capability of a digital multimeter to 800 amperes a.c.

The clamp is compatible with a digital multimeter that accepts 4mm shrouded banana plugs and has an a.c. milliamp range
Measures a.c. current from 100 mA to 800 A rms
30 Hz to 10 kHz frequency range
1000:1 conversion factor for easy calculation

Specifications
Attribute Value
Adapter Type AC
Maximum AC Current 800A ac
Best Accuracy ±3 %
Maximum Conductor Size 54mm
Safety Category CAT III 600 V
Output Type Current
Connector Type 4 mm Plug
Cable Length Extended 1.6m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Level CAT III
Safety Category Voltage 600V
Model Number p I800
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 2,089.50
units
Per unit
1 +
MYR2,089.50
Related Products
Standard AC current pliers Inspired by the principle ...
Description:
Standard AC current pliers Inspired by the principle of the Rogowski coil.Can measure intensity up to 3000 A when used with oscilloscopes and recorders.Its flexible measurement head is light and can be easily and quickly installed into hard-to-reach places.Three ranges: ...
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...
Single and dual range mini clamps with nominal ...
Description:
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac40Hz to 10kHz bandwidthMN09, MN11 & MN21 ac current output 1mA ac / 1A ac for use with multimeters & recorders with a 200mA ac ...
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel ...