Petzl Rappelling Glove Leather

  • RS Stock No. 136-3779
  • Mfr. Part No. K52 MT
  • Manufacturer Petzl
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Petzl CORDEX Belay Rappel Gloves

Petzl Cordex, Belay rapelling gloves are lightweight leather and give you the durability of a work glove with the fit and dexterity of a thinner glove. The double layered leather protects the palm and other high-wearing areas and the neoprene cuffs have a reinforced carabiner hole. The hole in the cuffs allows you to attach the gloves to your harness. The back of the gloves is an abrasion resistant, breathable stretch nylon plus the cuffs have a hook and loop fastening for added comfort.

FEATURES and BENEFITS:

Cordex Belay rappelling gloves Leather – Goat skin
Ergonomic cut
Double leather on palm, fingertips, between thumb and index finger
Neoprene cuffs with reinforced carabiner hole
Cuffs have a hook and loop fastening
Gloves can attach to a harness
Back of the gloves is abrasion resistant, breathable stretch nylon
Good ventilation
Lightweight
Durable
Excellent fit

SPECIFICATIONS:

Stock number 136-3777 Colour is Tan
Size 9 – L
Hand circumference 23 cm
Weight 118 g
Stock Number 136-3779
Colour is Tan
Size 8.5 – M
Hand circumference 21.5 cm
Weight 115 g

Standards

CE EN 420, CE EN 388 (3133)

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

Specifications
Attribute Value
Material Leather
3 In Global stock for delivery within 4 - 6 working days
Price Each
MYR 225.29
units
Per unit
1 +
MYR225.29
Related Products
Petzl ASAP mobile fall arrest device for rope, ...
Description:
Petzl ASAP mobile fall arrest device for rope, has a unique locking system and excellent fall protection working at height. In normal mode the ASAP moves freely along the rope, no manual intervention needed. If there is a shock or ...
Petzl OK Screw-Lock Oval Carabiner is an aluminium ...
Description:
Petzl OK Screw-Lock Oval Carabiner is an aluminium carabiner that is oval shaped giving you a wide section for optimal equipment loading. The carabiner design limits catching points and allows the carabiner to rotate plus a keylock system avoids snagging. ...
Petzl OK Oval Carabiner is a Triact-Locking aluminium ...
Description:
Petzl OK Oval Carabiner is a Triact-Locking aluminium carabiner that is oval shaped giving you a wide section for optimal equipment loading. The carabiner design limits catching points and allows the carabiner to rotate plus a keylock system avoids snagging. ...
Petzl MGO OPEN 60 is an auto-locking directional ...
Description:
Petzl MGO OPEN 60 is an auto-locking directional connector complete with a large gate opening including a gated connection point. The gate opening allows for connection to metal structures or large diameter cables and bars. The gated connection point is ...