RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

09-3817, 64 Way Double Sided DIN 41612 Extender Board Extender Board FR4 281.6 x 100 x 1.6mm

8 In stock for delivery within 4 working days
Add to Basket

Price Each




RS Stock No.:
Mfr. Part No.:
Vero Technologies
COO (Country of Origin):
unitsPer unit
1 +MYR855.73

64-Way Standard Extender Board

Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test.

DIN 41612 type B connectors
Solder resist coating to prevent solder bridging and finger staining

Supplied with

Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels)

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

TypeExtender Board
ConnectionDIN 41612
Number of Contacts64
Base MaterialEpoxy Glass Fabric Laminate
Number of Sides2
Dimensions281.6 x 100 x 1.6mm
FR Material GradeFR4