Phoenix Contact3211907 PT 4-HESILA 250 (5X20) Series Fused DIN Rail Terminal, 0.2 → 6mm², Single-Level, Push In

To give safety top priority when linking wires on your DIN rail, choose this fused terminal from Phoenix Contact. It has slots for 5 x 20mm G fuse inserts so it holds the fort firmly against short circuits and overloads. Durable PA insulation means it won't give in to bumps, scrapes or chemical splashes, making it ideal for use in harsh industrial environments.
To make sure you don't get caught unawares by sudden power spikes, this unit has a surge voltage rating of 4kV. Its supply voltage of 250V makes it suitable for low-voltage settings and, as you can use it on both AC and DC circuits, it's a versatile choice. Thanks to innovative push-in technology, you'll enjoy simple, tool-free setup, saving time and effort. This terminal is a common component of circuit designs in the railway industry.

• Accommodates cable sizes between 24 and 10AWG for versatility
• Meets IEC 60947-7-3 safety requirements for low-voltage fuse terminal blocks
• Wide operating temperature range between -60°C and +105°C for use in demanding conditions

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.