Weidmuller WDTR Series Brown Test Disconnect Terminal Block, 2.5mm², Double-Level, Screw Termination

View all DIN Rail Terminal Blocks
Unavailable
RS will no longer stock this product.

Alternative

This product is not currently available. Here is our alternative recommendation.

presentation
Weidmuller 1039900000 WTR Series Brown, 2.5mm², Single-Level, Screw Termination
RS Stock No.
295-9134

Each

MYR27.15

RS Stock No.:
247-9133
Mfr. Part No.:
9528070000
Manufacturer:
Weidmuller
Find similar products by selecting one or more attributes.
Select all

Brand

Weidmuller

Colour

Brown

Number of Levels

Double

Series

WDTR

Termination Method

Screw

Cable CSA

2.5mm²

Current Rating

14A

Voltage Rating

400 V

Dual Isolating


The WDTR2.5 is 2 in, 2 out with both lines being separately disconnectable. These terminals are fully encapsulated so do not need end plates.

Note

The voltage and current ratings on this page are to VDE ratings.

Warning

Isolating terminals must only be used for isolating sections of a circuit for test purposes. They must never be used to switch devices on or off when power is applied.

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR


The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.