Huco CV Joint Gaiter, Bore 27.5mm, 58mm Length

  • RS Stock No. 264-5475
  • Mfr. Part No. 143.29
  • Manufacturer Huco
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
Product Details

Gaiters

Moulded from a mix of synthetic rubber materials
Operating temperature range -20 to 100°C.
Resistant to oils, greases, many chemical agents, sea water and tropical climates
Gaiters can be secured using cable ties around the locating ring on the outside diameter

//media.rs-online.com/t_line/L264533-01.gif
//media.rs-online.com/t_line/LF264533-99.gif
Specifications
Attribute Value
Bore 27.5mm
Overall Diameter 51mm
Overall Length 58mm
Material Rubber
Maximum Operating Temperature +100°C
Minimum Operating Temperature -20°C
3 In Global stock for delivery within 4 - 6 working days
Price Each
Was MYR38.46
MYR 35.15
units
Per unit
1 - 5
MYR35.15
6 - 24
MYR33.83
25 +
MYR32.39
Related Products
Manufactured from durable synthetic rubber these gaiters are ...
Description:
Manufactured from durable synthetic rubber these gaiters are resistant to most oils, chemical and grease. They provide protection for universal joints from dirt ingress and contamination and help maintain lubrication of plain bearing joints and increase service life. Installation is ...
Available in heat-shrink or threaded versions for use ...
Description:
Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.
From Telegartner, a series of RJ45 black cable ...
Description:
From Telegartner, a series of RJ45 black cable boots. The RJ45 protective hoods are designed to provide extra protection forthe connector when terminated to cables or patch leads. Available with or without latch protection. Suitable for various cable diameters.
Plastic strain relief hoods for fitting to RJ45 ...
Description:
Plastic strain relief hoods for fitting to RJ45 data plugs (type 8//8). Hoods accept standard 4 pair UTP and STP cable and snap onto the rear of the plug preventing excess strain on the cable clamp. The hood extends over ...